Changed Value Highlight

Top  Previous  Next

Values in the Table Window may be highlighted to show editing changes, with different colors used for values which have decreased and increased. By default, values which have been decreased are shown in green; values which have increased are shown in red.  This makes it easy to identify what values have been changed when editing a table.

 

change-value-highlight

 

The comparison values used for highlighting are set when a calibration is loaded or saved.  Thus saving a calibration will reset the highlighting.

 

Additionally a trace indicator may be shown on the table axis to show what values the ECU is reading. The axis trace indicator will be in center of each row or column when the datalog trace value is the same as the axis index value.  eg the axis trace indicator will appear in the middle of the '1250' rpm cell when the datalog rpm is 1250 rpm.

 

Changed Value Highlight may be switched on or off, and the highlight color changed under Display Settings.