s200 Upgrade

HEATSHIELD | S100 | S300 | REFLASH | K100 | K-PRO | FLASHPRO | TRACTION CONTROL

Information
About Hondata
Applications
Dealers
Prices
News
Cars

Products
Heatshield
OBDI Systems
  • s100
  • s300
  • CPR
  • Accessories
K-Series
  • Reflash
  • k100
  • K-Pro
  • FlashPro
Traction Control

Applications
Wizard
By ECU
By Engine
By Vehicle

Support
s300 Help
K-Pro Help
FlashPro Help
Traction Control
CPR Help
Tech
Software
Downloads
Forum

Resources
Media
Dyno Charts
Feedback

  


Hondata, Inc.
2840 Columbia St
Torrance, CA 90503


With the s200, boost and datalogging are enabled by entering a numeric key into HondaLogger.  You do not need to ship the unit back to the dealer or Hondata.

Upgrade Process

To upgrade the s200 you will need a PC computer (a laptop is best), HondaLogger V3, and the s200 connected to your car so that you can power it up. 

Step 1.  You will need the serial number from the s200.  This is normally found on the bottom of the interface box.  If you cannot find the serial number then perform steps 3 & 4 to find the serial number (the serial number is displayed on the top of the 'ECU Information' window).

Step 2: Contact your dealer, giving them the serial number of the unit and the option or options which you wish to unlock.

Step 3: Connect the PC/laptop to the interface box using the datalogging cable.  Switch the vehicle's ignition on, but do not start the engine.

Step 4: From HondaLogger select the 'ECU Information' from the file menu.  This works even if datalogging is not yet enabled in the s200 system.

Step 5: Select which option you wish to upgrade (boost or datalogging).

Step 6: Enter the unlock code given to you from your dealer.

Step 7: The option is now enabled.

 

 

Copyright 2015 Hondata, Inc. All rights reserved. Warranty Information
Products not legal for sale or use in California on any pollution controlled motor vehicles.