• Hondata Reflash - Civic Si 2002-2004

Reflash your 2002-2004 Civic Si engine computer.

  • Fuel, ignition timing and cam timing optimized.
  • Rev limiter raised to 7700rpm.
  • 10-12 peak hp gain depending on the dyno and modifications
  • 4-9ft lb torque across the rev range
  • Power peak raised 400 rpm from 6300 rpm to 6700 rpm (higher with headers)
  • 0-60 mph times improved by 1 second.
  • Fully dealer compatible -works with all Honda scan tools and equipment.

This is for an ECU reflash - the ECU is not included.  Hondata does not sell direct - the reflash must be purchased from a Hondata dealer. The ECU reflash form must be sent with your ECU.

We do not recommend the use of nitrous or forced induction for this reflash. For these applications use the K-Pro.

We recommend that 91 octane fuel be used with this reflash.

Warning

Within the USA this product is legal only for racing vehicles which may never be used upon a public highway.

Restriction
Sales Region US
EPA/CARB status (USA) Competition vehicles only
Vehicle
Model Civic
Year 2002-2005
Market US
Trim Si
Engine K20A3
Transmission MT
ECU
Part Number 37820-PNF-A01 to 37820-PNF-A12

2002 Civic Si, stock and with K20A3-Si Flash program.

Tuning notes

This tune is for 91 octane pump gas. The reflash has not been tested with 87 octane fuel. In the graph above, the change in octane was worth about 2hp and the tuning 8-10.

We recommend that 91 octane fuel be used with this reflash.

For consistency in dyno testing we suggest you follow the dyno procedure outlined here.

Will this affect my warranty?

Any increase in RPM limit is at your own risk. If you suffer engine damage that is related to excessive revs Honda/ Acura will not cover your warranty.

With regard to aftermarket parts, the law is that warranty coverage cannot be denied simply because such parts are present on the vehicle, or have been used. For more details read the Kseries FAQ.

Emissions testing shows no measurable difference from stock.

What if you have modifications?

This program was tuned specifically for a CAI (cold air intake) as they give the best power gains. All future tuning will be done with either the stock or CAI intake.

What do others think?

The user forums in http://ephatch.com/forum/have a lot of user feedback:

"Az02Si
Hondata powered sucka.

Registered: Jul 2002
Location: Mesa,Az
Posts: 280
My Hondata impressions....

Um....BUY IT NOW!!!!!! I just threw my ecu back in my car,and went for adrive....WOW!!!!! The extra revs were REALLY needed with thius motor.3-4upshift occurs at about 87-89 mph,and the car REALLY feels alive up topnow too.It feels like a stretched,smooth powerband with a few extra poniesthrown in the mix....Im VERY happy,and will provide dynochartsASAP.IMHO,ANYONE who can afford it should just get it..It WILL be a musthave for these cars.It reminds me of my old b16 now,watching the tach goto 7800ish Ill post more impressions shortly,i gotta DRIVE!!!!! Thanks tothe crew at Hondata for a GREAT product that everyone will love! "

Some 2002 onwards and all 2006 onwards ECUs are flash programmable. The ECU can be repeatedly reprogrammed without removing or replacing and internal components.

How do you get your ECU reflashed?

  • Fill out this form
  • Contact your dealer. All sales are made through Hondata dealers.
  • Your dealer or you will need to remove and send your ECU, immobilizer and key to Hondata.

Do I need to send the key & immobilizer?

Only for 2002-2006 RSX and 2002-2005 Civic Si reflashes. All other reflashes do not need to send a key or immobilizer. Flashing the ECU does not in any way alter the immobilizer operation.

How long does it take?

The ECU will be reprogrammed and shipped out the same day it is received. Shipping in the continental USA is FEDEX next day.

Will this affect the fuel economy?

Assuming you drive the vehicle in the same way, no. Fueling at cruise is the same as stock.

Will this affect the engine life?

Provided your engine is maintained correctly this modification should not affect the engine's life.

Will this affect the warranty?

It should not.

Federal law sets forth requirements for warranties and contains a number of provisions to prevent vehicle manufacturers, dealers and others from unjustly denying warranty coverage. With regard to aftermarket parts, the gist of the law is that warranty coverage cannot be denied simply because such parts are present on the vehicle, or have been used. (see Federal Warranty Laws for details). The warranty coverage can be denied only if the aftermarket part caused the malfunction or damage for which warranty coverage is sought.

If a dealership denies warranty coverage (more details here) , they should be willing to do so in writing. Have the dealer describe the failure which is causing your problem AND how the dealer believes the aftermarket product installed is responsible for the problem. Keep an accurate log of all contacts and correspondence in addressing the warranty denial. Hondata will provide any technical information the dealership requires.

With any increase in rev limit there is an increased risk of valve damage. To minimize your risk use the Hondata program with the stock rev limit. All reports of valve damage we have heard have been as a result of miss-shift. The Type S valve springs are good. We have tested a Type S with an 8900 rev limit in a press test vehicle for several months with no problems.

Will any settings be lost?

Your ECU will lose some idle settings and fuel trim when it is unplugged. It will relearn idle automatically if you leave it idling for 10 minutes. As you drive the car it will relearn fuel trim values in a matter of minutes.

Can a Honda/Acura dealer erase this program?

Only if another Honda/Acura update is released could a dealer erase your existing program. If Honda/Acura comes out with an upgrade you are not obliged to have it installed. If you do not wish to have the dealer program installed there is a wire you can disconnect or cut, to prevent reprogramming. The charge for restoring an erased program is $75 (cashiers check or money order) shipping included.  You can also remove pin 7 from the OBD2 port to keep the dealer from reflashing your ecu (DO NOT CUT THIS WIRE).

What about bolt ons?

Most programs have been tested to work well with a variety of intakes and exhausts. No retuning is necessary after an intake is added.  Some programs as tuned specifically for an intake or exhaust, and if so, will mention this in the reflash notes.

If you currently run nitrous, these programs will probably not be suitable due to the ignition advance used. If you want to use nitrous and this program now, you must install a nitrous system that retards ignition.

What about turbo-charging and super-charging?

Use the K-Pro or FlashPro.

What octane is recommended?

For high compression engines (K20A2, K20Z1, K20Z3, K24Z7) 91 octane fuel or better is recommended.  For all other engines there are gains from using higher octant fuel, as the ECU will automatically advance the ignition timing if no knock is detected.

The K series ECU, in order to be re-programmed must have a functioning immobilizer system. Three items must be sent to Hondata: the ECU, the ignition key and the immobilizer. The immobilizer works as normal after the ECU has been re-flashed.

Tools needed:

  • Philips screwdriver
  • 10 mm socket and drive
  • Time needed : 10-15 minutes

Removing the immobilizer (Civic Si, RSX / Integra)

Under the steering column remove the three philips screw holding on the bottom plastic cover.

Depress the bottom cover along its top edge where it meets the top cover to separate the plastic clips. Rotating the steering wheel 45 degrees can help.

Lower the steering column and remove the bottom plastic cover from over the height adjustment lever.

Unclip the green connector immobilizer connector and unscrew the securing two philips screws.


RSX ECU removal

The ECU is located in the passenger's footwell. The kick panel is removed after depressing the centers of three small plastic buttons around the front covering panel.

Unplug the three wiring connectors and remove the two front most 10mm locating bolts, plus the rear bolt. The ECU will slide out easily - if it does not, then check that the rear bolt has been loosened or removed.

K20A3 Civic Si ECU removal

The Civic Si's ECU is located in the passenger's footwell behind the glove compartment.

Unclip the lower plastic panel:

Unplug the three ECU connectors.

Remove the lower two 10 mm bolts.

Open the glove compartment and push out from behind the two bump stops. The glove compartment will drop after this is done.

Undo the last 10 mm bolt and slide the ECU down.

Hondata Reflash - Civic Si 2002-2004

  • Brand: Hondata, Inc.
  • Product Code: Reflash - Civic Si 2002-2004
  • Availability: In Stock
  • $295.00