|
The command exports the current datalog file in a comma separated value format.
Fields and Units
| • | time - frame time (seconds) |
| • | speed - vehicle speed (kph) |
| • | map - manifold pressure (bar) |
| • | tps - throttle position (%) |
| • | injector - injector duration (ms) |
| • | ignition - ignition timing (degrees) |
| • | ta - air temperature (degrees centigrade) |
| • | tw - water temperature (degrees centigrade) |
| • | lambda - air/fuel ratio (lambda) |
| • | shorterm - short term fuel trim (%) |
| • | longterm - long term fuel trim (%) |
| • | o2voltage - oxygen sensor voltage |
| • | voltage - battery voltage (volts) |
| • | eld - electrical load (amps) |
| • | vtp -VTEC pressure switch input |
| • | vts - VTEC spool valve output |
| • | knocklevel - knock level from knock board |
| • | knockretard - knock retard from knock board (degrees) |
| • | bc_duty - boost controller output duty cycle (%) |
| • | iatcorr - fuel correction from IAT |
| • | ectcorr - fuel correction from ECT |
| • | secinj - secondary injector output |
| • | ethanol - ethanol content (%) |
|