AiM Dash Output

Top  Previous  Next

The S300 V3 can output Rs232 serial information to the AiM MXL dash range.



Wire the RS232TX pin on the s300 to the RS232RX pin on the AiM dash.
In SManager / Parameters / Digital Input / Output select 'AiM MXL'.
Upload the calibration to the ECU.
In the AiM 'RaceStudio' configuration software select 'Hondata' as the ECU manufacturer and 'KPro' as the ECU Model.


Note that you do not need the AiM KPro converter (part number X05EFIHKPRO).  The s300 can drive the dash directly.


See Serial Output Format