Analog Pressure

Top  Previous  Next

Any pressure sensor which produces a linear 0-5V output may be used as an analog input on the KPro.


As an example, here is how to wire the Autometer 0-100 psi liquid pressure sensor.


You will need both the sensor part # 2246 (4590-0023-12), and the wiring harness, part number 5227.


The sensor harness has three wires:

+5V (grey) - connects to an ECU 5V voltage supply
Ground (black) - connects to an analog ground
Signal (purple) - connects to the analog input


eg. Connecting two Autometer pressure sensors.