Moates Ostrich 2.0 & RomEditor 4

Hondata installation questions / answers / issues.
Locked
csalinas
Posts: 1
Joined: Fri May 29, 2009 1:47 pm

Moates Ostrich 2.0 & RomEditor 4

Post by csalinas »

Ok so im trying to play around with the tuning on a S200 ecu.
We bought the Ostrich 2.0 Kit from Moates and it came with the emulator and eprom burner along with some other cables. So far I have had no luck getting RomEditor to see the ECU. Listed below is how I have the connections made.

1: From Laptop to Ostrich 2.0 EMU ( Via Basic USB Cable provided by Moates )

2: From Ostrich 2.0 EMU to ECU Eprom Socket ( Via ribbon cable provided by Moates )

3 Hondata S200 Blue Box to ECU ( Via 4 wire cable provided from Hondata )

This ECU has been tuned before but with what i'm not sure.
If anyone can please help me and let me know what i'm missing or doing wrong it would really help out.

Thanks
Chris
Dallas, TX :?:
User avatar
Spunkster
Site Admin
Posts: 19262
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster »

If you have not purchased Romeditor 4 you cannot make changes or burn chips. IF you wish to tune yourself, you will be much better off just upgrading to the s300 as it has more features and is earier to tune with. The s300 also does not require the use of an emulator or programmer.

http://www.hondata.com/s300upgradeform.html
Locked