Whats up yall so i have a EJ1 with a k24a4 swap in it.
The car is auto but of course it switch to manual but with the stock auto harness in it. I already bypassed the whole clutch switch and all that already.
i have teh ktuned conversion harness and a carrot top tuning wiring harness. I have everything connected and good to go and even put the wiring harness ground extended to the transmission for that good ground.
My issue is i have everything connected and key on the car will crank over but there is no power going to the ECU, for me to load a base map, NOR is there power going to the fuel pump when IGN is on.
i hear the main relay click but nothing.
PLease help ive been trying to diagnose this for a week now T.T
Kpro no power / no fuel pump
Re: Kpro no power / no fuel pump
Have you tried the ECU in a known working vehicle?
Re: Kpro no power / no fuel pump
no but the ecu i bought brand new with kpro in it from TSM. never connected it until recently. also i dont have friends with kswaps to try the ecu in..
Re: Kpro no power / no fuel pump
What is the serial number that is on the K-Pro board inside the ECU?