K24a2 swap 8th gen need basemap

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
Nharris99
Posts: 8
Joined: Wed Mar 29, 2023 10:27 am

K24a2 swap 8th gen need basemap

Post by Nharris99 »

K24a2 , stock injectors , stock rbc intake manifold, 3 inch Sri intake , plm headers , 3 inch full exhaust, 50 degree vtc cam gear , type s oil pump , walbro 255 fuel pump , full stage 4 clucth . I’m in need of a basemap until I get it dyno’d soon
Car runs and drives , just won’t go over 4k
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: K24a2 swap 8th gen need basemap

Post by CalibratEd »

Post the calibration you are currently running with a datalog. This might be an issue unrelated to the tune.

-Ed
Nharris99
Posts: 8
Joined: Wed Mar 29, 2023 10:27 am

Re: K24a2 swap 8th gen need basemap

Post by Nharris99 »

Just a quick little drive
Attachments
lunch time run , local driving.fpdl
(2.23 MiB) Downloaded 59 times
Nharris99
Posts: 8
Joined: Wed Mar 29, 2023 10:27 am

Re: K24a2 swap 8th gen need basemap

Post by Nharris99 »

Morning commute regular stop and going
Attachments
this morning drive.fpdl
(57.72 KiB) Downloaded 53 times
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: K24a2 swap 8th gen need basemap

Post by CalibratEd »

Post the calibration file as well.

-Ed
Nharris99
Posts: 8
Joined: Wed Mar 29, 2023 10:27 am

Re: K24a2 swap 8th gen need basemap

Post by Nharris99 »

It’s in a basemap from a tuner and it’s locked , he’s not very responsive quickly that’s why I need your help . I can’t see the calibration because of his pass code
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: K24a2 swap 8th gen need basemap

Post by CalibratEd »

Nharris99 wrote: Sat Apr 01, 2023 1:35 pm It’s in a basemap from a tuner and it’s locked , he’s not very responsive quickly that’s why I need your help . I can’t see the calibration because of his pass code
I don't understand why tuners lock their tunes. The log shows the car is running lean. It could be that it is running so lean it will not let you rev past 4000rpm or the tuner might have placed a limit so you would not drive the car to hard. Without access to the calibration file I cant tell much more.

-Ed
Nharris99
Posts: 8
Joined: Wed Mar 29, 2023 10:27 am

Re: K24a2 swap 8th gen need basemap

Post by Nharris99 »

Do you think you can start me off with a different basemap or something? This situation is just inconvenient for me
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: K24a2 swap 8th gen need basemap

Post by CalibratEd »

Nharris99 wrote: Sat Apr 01, 2023 8:10 pm Do you think you can start me off with a different basemap or something? This situation is just inconvenient for me
I can help you out with that. When is your dyno tune?


-Ed
Nharris99
Posts: 8
Joined: Wed Mar 29, 2023 10:27 am

Re: K24a2 swap 8th gen need basemap

Post by Nharris99 »

Haven’t set it up yet, I was hoping within the next month or so. For now i just wanted a simple fun basemap until the dyno pretty much . I have some more logs I did today I can upload them if you want
Nharris99
Posts: 8
Joined: Wed Mar 29, 2023 10:27 am

Re: K24a2 swap 8th gen need basemap

Post by Nharris99 »

User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: K24a2 swap 8th gen need basemap

Post by CalibratEd »

Nharris99 wrote: Sat Apr 01, 2023 9:21 pm Haven’t set it up yet, I was hoping within the next month or so. For now i just wanted a simple fun basemap until the dyno pretty much . I have some more logs I did today I can upload them if you want
I have would reconsider where you are getting tuned if you are already having trouble. There is no need to post logs as they reflect the current calibration file you are running. I will work on a base when I have down time. For now take it easy on the car. If you want you can also use a Hondata base map and I can make some adjustments to make sure it’s running safe.

-Ed
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: K24a2 swap 8th gen need basemap

Post by CalibratEd »

Load this file and see if you can get an idle and normal drive log. I will make broad changes to make sure the car is running safe.

-Ed
Attachments
Nharris_base.fpcal
(21.68 KiB) Downloaded 67 times
Post Reply