D16z6 turbo map needed

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
rg1721
Posts: 6
Joined: Sat Dec 03, 2022 8:09 pm

D16z6 turbo map needed

Post by rg1721 »

Hey guys, this my current setup i have d16z6 p28 ecu its an eBay t3 turbo setup , 1200cc RC injectors , walbro 255 fp , sparksracing 3 bar map (SCALAR 659 , OFFSET -132 ), currently have my iacv blocked from old idling issues pior the car ran and idled fine with slight throttle to keep revs up at start, i have a adjustable fpr if need be to adjust , i believe that's it. I can get the car up and running with messing with a stock p28 calibrations but it cant idle without me holding the gas which is weird.. ill be hooking up my aem wideband just received earlier.. Thanks ( i attached some info on the map if any fine tuning needed about it)
Attachments
hondamapsensor.jpg
hondamapsensor.jpg (28.5 KiB) Viewed 4918 times
mapsensorinfo.png
mapsensorinfo.png (3.39 KiB) Viewed 4918 times
Post Reply