Hi all
I have a b16a2 turbo with Hondata s300
The car can see the coolant temperature but will not see it change / compensate. If u turn the ignition off and back on the car will then see the temp go up so on cold start it always sees the temperature as cold start unless I re set ignition.
Would this be a ecu issue or a wiring issue? Car has a type r harness and my mapper told me the cause was a type r harness in a non type r chassis
Coolant temp issue
Re: Coolant temp issue
Have you tried the ECU in a known working vehicle?
Re: Coolant temp issue
I’ve not but might try ask somone if I can only problem is it’s set for bigger injectors and 4bar map sensor but even with only ignition on should see the temp change you’d think?
Re: Coolant temp issue
You should upload the calibration for the vehicle you try it on.