Wiring loom to run an engine on an engine dyno.

K-Series Programmable ECU installation questions / support issues
Post Reply
Ady-smith
Posts: 1
Joined: Wed Oct 26, 2022 4:40 am

Wiring loom to run an engine on an engine dyno.

Post by Ady-smith »

Hi Everyone
I've done a search but not had any luck finding what i need, has anyone had their motor on an engine dyno running a standard Civic Type-R EP3 ecu with a K4Pro chip in?

More specific I would like to make an engine loom for dyno only purposes so would like it to be as basic as possible, the dyno sell I use have there own fuel pumps, charging systems so that would not need to be wired unless the ECU needs it?

Can anyone advice on what they have done if they've already run an engine on an engine dyno regarding the loom, or at least point me in the correct location to someone that has because i don't really want to take to whole loom to the dyno cell and do it that way.

Many thanks
Ady
Post Reply