Base map turbo b18c4

s300 and SManager software questions & answers
Post Reply
Hola111
Posts: 1
Joined: Sun Oct 16, 2022 7:19 am

Base map turbo b18c4

Post by Hola111 »

Hello
I would need a base map for b18c4 please.

B18c4 darton 86mm
JE pistons
Intake header stock (port)
Pauter rod with arp 625
Acl bearings
Arp main studs
Cometic head gasket
OEM water and oil pump
Gates kevlar belt
Baffled oil pan
Head: port and polish
Supertech inconel valves
Supertech bronze valve guides
Supertech valve springs
Supertech titanium retainers
Supertech valve locks and steam seals
2200cc bosch injectors
Turbosmart fpr
Turbo: BW s200sx ts with 57/76 billet 11 blade, fast spool turbo
Custom exhaust header
Custom 70mm exhaust
2x turbosmart wg
Turbosmart bov
Autronic boost controler
Intercooler samco
S9b gearbox
Exedy twin disc clutch
Arp flywheel bolts
255lph walbro fuel pump( for now)
4bar map sensor
DaX
Posts: 654
Joined: Tue Mar 18, 2003 3:48 pm

Re: Base map turbo b18c4

Post by DaX »

Look in the Vault (Window > Vault) for a similar setup, or choose a stock B18C tune, change your injectors to 2200cc, and change the MAP sensor drop down to 4 bar. Drive it straight onto a trailer or straight to a tuner and get it tuned.
Post Reply