Can you remove P0506 and P2176?

FlashPro questions & answers specific to the 2007-2008 Acura TL
Post Reply
jasonvictory86
Posts: 13
Joined: Tue Jun 18, 2019 7:32 am

Can you remove P0506 and P2176?

Post by jasonvictory86 »

Hi!
Can you remove the P0506 (Idle Control System RPM Lower than expected) and P2176 (Throttle Control System Idle Position Not Learned)?

I swapped in a J35a6 with 11:1 RL pistons, cams, and heads into my 2003 Accord 6-6. And after I break in the clutch and rings I’ll be putting my Eaton supercharger back on :)

The codes aren’t connected to emissions so I figure it might not be too crazy to ask.

Thanks!
- Jason
2003 Accord Coupe V6 6-6. J35a6 swap with J35a8 cams, heads, and pistons. ARP Headstuds, Spec Stage 2 clutch.
jasonvictory86
Posts: 13
Joined: Tue Jun 18, 2019 7:32 am

Re: Can you remove P0506 and P2176?

Post by jasonvictory86 »

Never mind. I fixed it. Admin, you can delete this post
2003 Accord Coupe V6 6-6. J35a6 swap with J35a8 cams, heads, and pistons. ARP Headstuds, Spec Stage 2 clutch.
Post Reply