please help
-
- Posts: 58
- Joined: Sat Apr 23, 2022 1:00 pm
please help
hey everyone, I just got my flashpro and I have uploaded completely stock calibration and i am seeing a lot of knock. is that normal (fake knocks) or should I do something about it.
the only mod I have is hasport rear engine mount.
thanks
the only mod I have is hasport rear engine mount.
thanks
- Attachments
-
- dataloglaunch.fpdl
- (200.51 KiB) Downloaded 61 times
-
- Posts: 58
- Joined: Sat Apr 23, 2022 1:00 pm
Re: please help
EFICU, i would appreciate your help :D
2011 civic si runs on 91 octane
2011 civic si runs on 91 octane
Re: please help
Yeah it definitely has too much timing in a lot of areas. I put together a quick file for you to get started and hopefully get you out of the issues you're having. We can work on it some more, but for now, take this for a twenty minute datalog and get at least one third gear WOT pull from 2500-8600 so we can see the WOT fueling.
-
- Posts: 58
- Joined: Sat Apr 23, 2022 1:00 pm
Re: please help
Thank you for replying:)
Will try it tomorrow and let you know
Will try it tomorrow and let you know
-
- Posts: 58
- Joined: Sat Apr 23, 2022 1:00 pm
Re: please help
hey EFICU,
here's 20 min drive
here's 20 min drive
- Attachments
-
- datalog0011.fpdl
- (2.96 MiB) Downloaded 57 times
Re: please help
Not too bad for a start, I went in and made some fuel and ignition adjustments as necessary. I also lowered vtec down to 4500, I think that might be a better fit to help get it out of the hole on those third gear pulls. Take this one for a spin when you can, same datalog and driving style.
-
- Posts: 58
- Joined: Sat Apr 23, 2022 1:00 pm
Re: please help
alright will try right now
-
- Posts: 58
- Joined: Sat Apr 23, 2022 1:00 pm
Re: please help
It looks like I didn't save that last calibration properly, I changed the vtec RPM but it didn't save the fuel and ignition adjustments. Sorry about that, take this one for a drive when you can. We'll see how this one looks, it should be much closer now in this revision.
-
- Posts: 58
- Joined: Sat Apr 23, 2022 1:00 pm
Re: please help
Definitely looks a lot better now that the changes saved. Sorry about that, I made some more adjustments to the WOT fueling and some minor MAF scaling for the part throttle. Still chasing a little bit of knock, but we'll keep working on it. Take this one for a spin when you can, same datalog and driving style.
-
- Posts: 58
- Joined: Sat Apr 23, 2022 1:00 pm
Re: please help
had some fun with this run :)
- Attachments
-
- datalog0015.fpdl
- (2.7 MiB) Downloaded 60 times
Re: please help
It looks really good. I made a couple 1-2% adjustments to sooth my OCD, other than that it's pretty much there. We'll see how this one looks. For this next one, I added a different pedal map which control the relationship between the pedal and throttle body. See what you think on this one, we can always go back to my base pedal map. Take it for a spin and we'll see how it looks.
-
- Posts: 58
- Joined: Sat Apr 23, 2022 1:00 pm
Re: please help
car feels good with the new adjustment
- Attachments
-
- datalog0016.fpdl
- (2.66 MiB) Downloaded 52 times
Re: please help
That's good. We're just about there, but some knock popped up. So I made some adjustments for that, everything else looked solid. Take this one for a drive when you can.