K100 P0600 Code

Hondata model coverage & ECU application questions.
Post Reply
DevonUsher610
Posts: 3
Joined: Mon Apr 11, 2022 9:55 am

K100 P0600 Code

Post by DevonUsher610 »

My k100 is bringing up a P0600 Code when reading it with a code reader using it in my Kswap EK 1997 civic in the UK, have had some one say to me its a issue with the k100 board connections with the main ECU board is this true at all? Have upgraded to a Kpro-V4 but don't want to sell this board to some one if it is faulty :)
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: K100 P0600 Code

Post by Spunkster »

It really depends on what settings the calibration used with it had.
DevonUsher610
Posts: 3
Joined: Mon Apr 11, 2022 9:55 am

Re: K100 P0600 Code

Post by DevonUsher610 »

O right, it has been mapped on a EP3 civic with a Inlet Manifold and Exhaust manifold have tried plugging secondary O2 Sensors etc in but still have the code coming up for some reason. Have tried it in a EP3 also and it still brings the code up and will not clear at all thanks for the speedy reply :)
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: K100 P0600 Code

Post by Spunkster »

I would suggest that you discuss the K100 error with the dealer that sold, installed and tuned it.
DevonUsher610
Posts: 3
Joined: Mon Apr 11, 2022 9:55 am

Re: K100 P0600 Code

Post by DevonUsher610 »

Okay ill get in contact with them.
Post Reply