need help with tune

FlashPro questions & answers specific to the 2006-2011 Americas Civic Si
reyez_fa5
Posts: 22
Joined: Tue Apr 05, 2022 9:40 am

Re: need help with tune

Post by reyez_fa5 »

the vtec feels about right
Attachments
datalog0000.fpdl
(374.9 KiB) Downloaded 11 times
EFICU
Posts: 3299
Joined: Mon Feb 25, 2019 10:14 pm

Re: need help with tune

Post by EFICU »

Unfortunately this datalog is only a minute and a half long. You might have hit the button the FlashPro twice or something. You'll have to make a new datalog unfortunately, sorry.
reyez_fa5
Posts: 22
Joined: Tue Apr 05, 2022 9:40 am

Re: need help with tune

Post by reyez_fa5 »

did it on both just incase
Attachments
retry drive.fpdl
(716.59 KiB) Downloaded 10 times
datalog0004.fpdl
(2.99 MiB) Downloaded 12 times
EFICU
Posts: 3299
Joined: Mon Feb 25, 2019 10:14 pm

Re: need help with tune

Post by EFICU »

Yeah it looks really good. We will now do one on the 30* cam with vtec at 4000. Take this one for a drive when you can, for this one, you can do a ten minute drive. The main thing we need is that clean third gear WOT pull basically.
Reyez_fa5.SD.Rev06 (30Cam)(Vtec4000).fpcal
(22.08 KiB) Downloaded 11 times
reyez_fa5
Posts: 22
Joined: Tue Apr 05, 2022 9:40 am

Re: need help with tune

Post by reyez_fa5 »

heres the next drive
Attachments
next 3rd gear wot.fpdl
(6.44 KiB) Downloaded 11 times
datalog0005.fpdl
(3.12 MiB) Downloaded 12 times
EFICU
Posts: 3299
Joined: Mon Feb 25, 2019 10:14 pm

Re: need help with tune

Post by EFICU »

Looks good again, we will do one on the 40* cam angle now just to see how much of this angle it likes for WOT. This is another one you can do a ten minute datalog, just be sure to get a clean third gear pull. This will be the last one locked on one cam angle, after this we blend it out and see how it runs.
Reyez_fa5.SD.Rev07 (40Cam)(Vtec4500).fpcal
(22.06 KiB) Downloaded 12 times
reyez_fa5
Posts: 22
Joined: Tue Apr 05, 2022 9:40 am

Re: need help with tune

Post by reyez_fa5 »

its getting better and better
Attachments
40 degree 3rd gear pull.fpdl
(1.57 KiB) Downloaded 8 times
datalog0002.fpdl
(3 MiB) Downloaded 11 times
40 degree 3rd gear pull.fpdl
(1.57 KiB) Downloaded 10 times
EFICU
Posts: 3299
Joined: Mon Feb 25, 2019 10:14 pm

Re: need help with tune

Post by EFICU »

It looks really good. It's run out of breath now on the 40* cam angle, so I've gone in and blended everything out now. This is the first one with the cam angle map set, so take it for a drive and see what you think. Vtec looks happiest at 4800, but we can move it up or down a little to test if you want. Feel free to have some fun with it, just be sure to get around twenty minutes of datalog time and at least one third gear WOT pull. Other than, feel free to have some fun with it, just be safe out there.
Reyez_fa5.SD.Rev08 (Blended)(Vtec4800).fpcal
(22.58 KiB) Downloaded 6 times
reyez_fa5
Posts: 22
Joined: Tue Apr 05, 2022 9:40 am

Re: need help with tune

Post by reyez_fa5 »

thanks brother
reyez_fa5
Posts: 22
Joined: Tue Apr 05, 2022 9:40 am

Re: need help with tune

Post by reyez_fa5 »

thanks brother
Attachments
datalog0003.fpdl
(3.68 MiB) Downloaded 4 times
blended drive.fpdl
(473.63 KiB) Downloaded 3 times
EFICU
Posts: 3299
Joined: Mon Feb 25, 2019 10:14 pm

Re: need help with tune

Post by EFICU »

Yeah it looks great man. I made a couple small fuel adjustments, but it's pretty much there. Go ahead and make another datalog when you can, no rush at all. It's 99% there so feel free to make a datalog when you drive somewhere of whatever, no need to go out and make an aimless datalog unless you want to.
Reyez_fa5.SD.Rev09 (Blended)(Vtec4800).fpcal
(22.84 KiB) Downloaded 7 times
Post Reply