2013 Civic Si Basemap help

2012+ US/Canadian Civic Si / 2013+ ILX
TokyoBadBoy
Posts: 31
Joined: Sun Feb 27, 2022 7:58 am

Re: 2013 Civic Si Basemap help

Post by TokyoBadBoy »

Morning, this is a datalog i took last night, I started logging at the point before my pull and then let it run for about 10 mins. It's me on the parkway. LMK I think it might've started logging at the 3k rpm part even though I pushed the button right before the pull
Attachments
datalog0000rev06.fpdl
(2.12 MiB) Downloaded 58 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2013 Civic Si Basemap help

Post by EFICU »

Yeah that pulls was a little off, but I think we got enough data for it. I've gone in and blended everything out, so this will be a good glimpse at the overall product. Vtec looks to be happy at 4300, so we'll see how that looks in the next one. It will still take a few revisions to smooth out all the fuel and finalize stuff, but now it should be fun to drive with everything blended out. Still shoot for twenty minute datalog with the clean third gear pull, but feel free to have more fun on the drive if you'd like. It's plenty safe to have some fun with.
TokyoBadBoy.SD.Rev07 (Blended)(Vtec4300).fpcal
(24.6 KiB) Downloaded 53 times
TokyoBadBoy
Posts: 31
Joined: Sun Feb 27, 2022 7:58 am

Re: 2013 Civic Si Basemap help

Post by TokyoBadBoy »

Hey, she's feeling really nice! Here's another log, I had some fun going on some backroads about halfway through, there's a few 3rd gear pulls mixed throughout!! Thank you!!
Attachments
datalog0000rev07.fpdl
(4.05 MiB) Downloaded 54 times
TokyoBadBoy
Posts: 31
Joined: Sun Feb 27, 2022 7:58 am

Re: 2013 Civic Si Basemap help

Post by TokyoBadBoy »

holy moly, I just realized I was using rev06 still LMAO... I really thought i put it on my hondata last night... My bad I'll upload it another one later..
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2013 Civic Si Basemap help

Post by EFICU »

Sounds good, we'll see how it looks.
TokyoBadBoy
Posts: 31
Joined: Sun Feb 27, 2022 7:58 am

Re: 2013 Civic Si Basemap help

Post by TokyoBadBoy »

Ok this is definitely the right tune! Feels really nice to me, sounds a bit different but in a good way I believe. The yonaka and rv6 dp go together so well imo. Here's a decently long drive, I did a couple pulls throughout. Thanks again and sorry about the last post HAHA
Attachments
datalog0000rev07forreal.fpdl
(5.83 MiB) Downloaded 57 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2013 Civic Si Basemap help

Post by EFICU »

Yeah now that the cam angle map is blended out, you're feeling what should be the most power throughout the rpm range. That's why we tuned all the cam angles so we can make those determinations. Glad it feels strong though, that's good.

Overall it looks great. I made a few adjustments for knock and some fuel adjustments. But it was pretty good for the first blended revision. Take this one for a spin when you can, same datalog and driving style.
TokyoBadBoy.SD.Rev08 (Blended)(Vtec4300).fpcal
(24.6 KiB) Downloaded 68 times
TokyoBadBoy
Posts: 31
Joined: Sun Feb 27, 2022 7:58 am

Re: 2013 Civic Si Basemap help

Post by TokyoBadBoy »

Here's another, like I said before it's feeling really nice and smooth. Loving it so far.
Attachments
datalog0000rev08.fpdl
(4.6 MiB) Downloaded 56 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2013 Civic Si Basemap help

Post by EFICU »

Yeah it looks really solid. I made some small adjustments again for the two knock it had and some fuel stuff. Nothing major, we're looking really good. Take this one for a spin when you can. No rush to take it out, we're splitting hairs at this point to get it dialed.
TokyoBadBoy.SD.Rev09 (Blended)(Vtec4300).fpcal
(24.68 KiB) Downloaded 53 times
TokyoBadBoy
Posts: 31
Joined: Sun Feb 27, 2022 7:58 am

Re: 2013 Civic Si Basemap help

Post by TokyoBadBoy »

Here she is, some fun had in this one. I believe my WOT is pretty early in the log but all the temps should be good, and I end up doing a couple more HAHA.
Attachments
datalog0000rev09.fpdl
(3.9 MiB) Downloaded 47 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2013 Civic Si Basemap help

Post by EFICU »

Looks really good man, we're just about there. One little knock in a different area, so I touched that up. Other than that, the WOT fuel need a minor adjustment and the part throttle looked great. We might be there on this one. We'll see how it looks.
TokyoBadBoy.SD.Rev10 (Blended)(Vtec4300).fpcal
(24.62 KiB) Downloaded 51 times
TokyoBadBoy
Posts: 31
Joined: Sun Feb 27, 2022 7:58 am

Re: 2013 Civic Si Basemap help

Post by TokyoBadBoy »

You're a wizard man, it's feeling really good. Here's another long-ish datalog to check out. Thank you.
Attachments
datalog0000rev10.fpdl
(4.14 MiB) Downloaded 50 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2013 Civic Si Basemap help

Post by EFICU »

It looks really good. Go ahead and make another datalog on that same calibration when you get a chance and we'll see how it looks.
TokyoBadBoy
Posts: 31
Joined: Sun Feb 27, 2022 7:58 am

Re: 2013 Civic Si Basemap help

Post by TokyoBadBoy »

Here she is!!! Like I said before, it's feeling like butter.
Attachments
datalog0002rev10.fpdl
(3.75 MiB) Downloaded 53 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: 2013 Civic Si Basemap help

Post by EFICU »

Overall it looks great. We had a couple random knock show up, so I made some changes for that. We're definitely right there, just looking for no knock basically. Take this one for a spin when you can.
TokyoBadBoy.SD.Rev11 (Blended)(Vtec4300).fpcal
(24.71 KiB) Downloaded 60 times
Post Reply