Hondata mobile has to be uninstalled then reinstlled
Hondata mobile has to be uninstalled then reinstlled
I have a stock 2007 S2K with a Flashpro tune. I have kept the Flashpro connected and bought the Hondata Mobile app version 1.2.9. Once the car is re-started, the app will not connect until it is uninstalled from then reinstalled on my I Phone 11. Is there a solution to this? Thanks.
Re: Hondata mobile has to be uninstalled then reinstlled
My phone still doesn't link with the app, despite turning phone on/off, bluetooth on/off. It will link if Flashpro unplugged from ECU, but I can't see having to do that each time I want to use the app. Is there an in-line off/on switch that stays plugged into ECU, that the Flashpro can plug into, eliminating the need to physically disconnect from the ECU? Thanks.
Re: Hondata mobile has to be uninstalled then reinstlled
Let's start with the basics. Android or Apple?
Hondata
Re: Hondata mobile has to be uninstalled then reinstlled
As stated above, I phone 11.
Re: Hondata mobile has to be uninstalled then reinstlled
What version of ios do you have? Are the lights on the FlashPro on when you try to datalog? Have you paired the phone to the FlashPro?
Hondata
Re: Hondata mobile has to be uninstalled then reinstlled
Software version 14.8.1. Flashpro is connected to ECU...green power light is lit. I haven't tried to data log. Just want to view the Hondata information. Am I missing something?
Re: Hondata mobile has to be uninstalled then reinstlled
The phone doesn't recognize Hondata app when I try to pair them.
Re: Hondata mobile has to be uninstalled then reinstlled
Also, FlashPro doesn't appear on the phone's list of devices to pair with.
Re: Hondata mobile has to be uninstalled then reinstlled
Next question: what version of FlashProManager have you uploaded to the ECU with?
Hondata
Re: Hondata mobile has to be uninstalled then reinstlled
I have not done that. I thought I just had to install the app on my phone, then connect to FlashPro. No clue as to how to upload FlashPro Manager.
Re: Hondata mobile has to be uninstalled then reinstlled
You must upload to the ECU before doing anything.
Please read the help file:
https://www.hondata.com/help/flashpro/calibrations.htm
https://www.hondata.com/help/flashpro/o ... ration.htm
https://www.hondata.com/help/flashpro/u ... ration.htm
Please read the help file:
https://www.hondata.com/help/flashpro/calibrations.htm
https://www.hondata.com/help/flashpro/o ... ration.htm
https://www.hondata.com/help/flashpro/u ... ration.htm
Re: Hondata mobile has to be uninstalled then reinstlled
None of that means anything to me. After I bought the FP, a tuner took over and did his stuff. The FP then sat on a shelf for almost 5 years, when I read about the Hondata app. When I checked it out on YouTube, there was no mention of uploading anything to the ECU. When I unplug, then plug FP to ECU, everything (dashboard, race track...everything) works fine. Once the car is turned off and re-started, the phone won't recognize the FP, so I have to turn off the car, disconnect, then reconnect FP to ECU to get the phone to recognize and connect to FP. I'll go back to the tuner. Thanks for your time.
Re: Hondata mobile has to be uninstalled then reinstlled
I'll give this another stab. The tuner already uploaded the programs when he tuned the car. Hondata mobile app will sporadically connect...once OBD11 is disconnected, then re-connected, so I know it works. But how to do this predictably? How will another upload help if the ECU has already been FlashPro tuned?
Re: Hondata mobile has to be uninstalled then reinstlled
This also affects the firmware in the FlashPro.
Hondata
Re: Hondata mobile has to be uninstalled then reinstlled
I have a Mac laptop, with not enough memory to load Bootcamp for Windows. So, I'll get a cheap Windows laptop and go from there. Wish me luck.