p2185
p2185
Hello, I got my ECU replaced and programmed to my immobilizer, I think I got the vehicle tune not sure it does the tune under 15 seconds, the online videos I am seeing all say it should take 5 mins but those are for civics, anyway after I got the tune done I keep getting this code P2185 ECT SENSOR CIRCUIT HIGH VOLTAGE.
- Attachments
-
- EB7DD489-4958-4ED4-B88E-C0052B09E79B.jpeg (4.51 MiB) Viewed 5149 times
Re: p2185
So for whatever reason the flash pro was putting the tune into the obd2 dongle not my vehicle, I hooked up the flash pro held down the program button the dongle started flashing different ways saw some action on my dash check engine came off.
I adjusted these settings not sure if I did thus correctly
I adjusted these settings not sure if I did thus correctly
- Attachments
-
- A4D10F05-3020-46E3-B0C5-2F28BAE54E1B.jpeg (104.53 KiB) Viewed 5137 times
-
- 6587F072-EB43-4003-B032-01BBD74FB04C.jpeg (93.54 KiB) Viewed 5137 times
-
- 5CA16F33-4CDD-4992-B1F1-1B819F676643.jpeg (111.34 KiB) Viewed 5137 times
-
- 0D13ECD9-E22D-4E16-82B1-7961F785A40E.jpeg (102.14 KiB) Viewed 5137 times
Re: p2185
Yes I had the vehicle in the on position, held the program button it was solid then it started to flash a few mins and some lights in the dash came on and off, last thing it did was the check engine when on and off, it never did this while I had the computer plugged in.