Terminals and pin tool for TCS connector

Post Reply
RallyCivic
Posts: 24
Joined: Tue Nov 20, 2018 6:01 pm

Terminals and pin tool for TCS connector

Post by RallyCivic » Tue Mar 05, 2019 8:19 pm

Hi,

I need to connect to the CAN output of the TCS controller. Where can I get the wire terminals for the connector and the pin tool?

User avatar
Hondata
Site Admin
Posts: 8474
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Terminals and pin tool for TCS connector

Post by Hondata » Wed Mar 06, 2019 10:31 am

They've changed all the part numbers, but here goes... The connector is AMP172143 (now Tyco 172143-1) The housing is 172047-2. Pins should be 1-170321-1 or 1-170291-1 or 1-170291-4 See https://www.te.com/usa-en/product-172047-2.html
Also any crimp tool will work for terminals that big.
Hondata

RallyCivic
Posts: 24
Joined: Tue Nov 20, 2018 6:01 pm

Re: Terminals and pin tool for TCS connector

Post by RallyCivic » Sun Mar 10, 2019 5:15 pm

Thanks, ordered some from mouser.

Post Reply