Hey guys, I recently got hondata and I loaded the Stock Reflash on my 2012 civic si.
I would like to know the difference between MAFTuned vs the Stock Reflash Tune.
I did notice on the under the vtec window on Stock Reflash Tune : RPM Window set to 5000 , but the MAP(bar) set to 4.311
But on the MAFTuned and on the stock equivalent tune the Map(bar) is ~.800
MAFTune from FlashPro
StockReflash from FlashPro
Is it supposed to be 4.311?
I just downloaded it from the calibrations.
Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)
2 posts • Page 1 of 1
In stock from that table is pretty much disabled and VTEC is set to 5000 with no window. There is no problem with the calibrations built into the software.