PRC Ecu - how to identify pre-facelift or facelift ?

Hondata model coverage & ECU application questions.
Post Reply
thomasn
Posts: 17
Joined: Thu Aug 30, 2018 1:33 am

PRC Ecu - how to identify pre-facelift or facelift ?

Post by thomasn » Thu Aug 30, 2018 1:41 am

Hi,

i bought a used PRC ecu, to install a Kpro V4 and drive a K20a engine in an Ariel Atom.

The company i send the stock ecu to, is asking if the ECU comes from a pre-facelift DC5 or facelift DC5.
I don't know, and the seller of the ECU does not know :(

So, the serial number is :

37820-PRC-013
2070-301682

does it help ?

I know i will have to modify the engine harness i have (from an UK EP3 / K20A2) and the K-tuned universal swap harness, so, what is exactly the difference and what does it involve for this PRC ecu to be socketed in the pre-facelift way or facelift way ?


Thanks
Thomas.

User avatar
Spunkster
Site Admin
Posts: 18019
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: PRC Ecu - how to identify pre-facelift or facelift ?

Post by Spunkster » Thu Aug 30, 2018 10:00 am

That is an early model ECU. The dealer should be able to install this without any problems. I'm not sure what modifications to the harness will need to be done on something like this.

thomasn
Posts: 17
Joined: Thu Aug 30, 2018 1:33 am

Re: PRC Ecu - how to identify pre-facelift or facelift ?

Post by thomasn » Thu Aug 30, 2018 12:24 pm

Thanks for your help Spunkster :)

Have a good day

Post Reply