k24/20 calibration/basemap

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
CaptnStabbin
Posts: 1
Joined: Sat Aug 26, 2017 6:39 am

k24/20 calibration/basemap

Post by CaptnStabbin » Sat Aug 26, 2017 6:48 am

hello everyone new to the forum here.
looking to see if someone can point me in the right direction of a calibration or basemap
for my car.
its an fg2...
K24
k24z3 pistons/rods
stock rbc head
dc5 oil pump
plm race header (no cat)
injen cai
70mm exhaust
stock 310 injectors

typer86
Posts: 314
Joined: Sun Oct 28, 2012 3:17 pm

Re: k24/20 calibration/basemap

Post by typer86 » Sat Sep 23, 2017 6:55 am

Check if you can use the full VTC profile to avoid valve piston contact. Otherwise you can use the FG2 starting calibration as well and tune the ignition, IAT compensation and fuel tables.

Hope it helps.

Post Reply