Stock tuned Race header calibration Help

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
Lightspeed
Posts: 3
Joined: Fri Jun 16, 2017 7:41 am

Stock tuned Race header calibration Help

Post by Lightspeed »

Hello. I recently bought a flashpro for my civic SI 8th gen (2007 sedan), but in the flashpro manager I cant find the calibration I think is closer to my mods:

HPS Hose on stock intake airbox + K & N filter
Megan Racing Header
Megan Racing Downpipe
Stock Catback.

I remember seeing at hondata's site a calibration called "Stock Tuned Race Header Highflow Cat". This one does not appear in the list of calibrations using flashpro manager, and I'm wondering if anyone here happens to have it, so I can test it, since so far every other calibration I've tested runs lean either in the low cam or the high cam under VTEC.

Thanks in advance for your help!

FA508
Posts: 6
Joined: Sat Aug 29, 2020 10:59 am

Re: Stock tuned Race header calibration Help

Post by FA508 »

I don't know if flash pro has the tune for race header only. But if there is no calibration for the header only then might as well just add an intake and race header combo and use the calibration from flash pro. I have short ram intake and race header and I ran the base map calibration from flash pro for intake and race header and high flow cat. It runs smooth and fine for now until maybe Ill use etune later but it is still running smooth for now.

iaaan
Posts: 4
Joined: Wed Sep 02, 2020 7:27 pm

Re: Stock tuned Race header calibration Help

Post by iaaan »

Lightspeed wrote:
Sun Jun 25, 2017 9:24 am
Hello. I recently bought a flashpro for my civic SI 8th gen (2007 sedan), but in the flashpro manager I cant find the calibration I think is closer to my mods:

HPS Hose on stock intake airbox + K & N filter
Megan Racing Header
Megan Racing Downpipe
Stock Catback.

I remember seeing at hondata's site a calibration called "Stock Tuned Race Header Highflow Cat". This one does not appear in the list of calibrations using flashpro manager, and I'm wondering if anyone here happens to have it, so I can test it, since so far every other calibration I've tested runs lean either in the low cam or the high cam under VTEC.

Thanks in advance for your help!
Hi if you guys need etune I can help for free. Just DM me.

Post Reply