B16a2 all motor every bolt on

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Posts: 1
Joined: Sat Feb 18, 2017 12:35 pm

B16a2 all motor every bolt on

Post by Vtecsin03 »

Need a good calibration for my b16a2. Internally stock.

-2.5" to 3" catback no cat straight pipe
-2.5" 4-1 header
-3" short ram intake
-walbro 255 also have fuel pressure regulator
-Skunk2 pro series intake manifold with 70mm throttle body bore matched
-stock injectors

Post Reply