FlashPro Cannot Lock to Car

FlashPro Manager software
DallasJhawk
Posts: 7
Joined: Mon Mar 24, 2014 4:48 pm

FlashPro Cannot Lock to Car

Post by DallasJhawk » Tue Dec 20, 2016 6:03 pm

My FlashPro wont lock to my 2016 Civic EX-t due to an unknown calibration on the ECU. Any info would help since its after hours

User avatar
Hondata
Site Admin
Posts: 8474
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashPro Cannot Lock to Car

Post by Hondata » Tue Dec 20, 2016 7:15 pm

It probably is because your ECU is not supported. With the FlashPro plugged into the vehicle and the ignition on use the 'Send Support Information to Hondata' from the help menu.
Hondata

DallasJhawk
Posts: 7
Joined: Mon Mar 24, 2014 4:48 pm

Re: FlashPro Cannot Lock to Car

Post by DallasJhawk » Tue Dec 20, 2016 7:27 pm

I did that about 30 minutes ago. When I checked you website and typed in my ECU I got the attached response
Attachments
12-20-2016 6-28-39 PM.jpg
12-20-2016 6-28-39 PM.jpg (32.26 KiB) Viewed 3021 times
12-20-2016 6-57-02 PM.jpg
12-20-2016 6-57-02 PM.jpg (49.47 KiB) Viewed 3021 times

User avatar
Hondata
Site Admin
Posts: 8474
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashPro Cannot Lock to Car

Post by Hondata » Tue Dec 20, 2016 9:10 pm

We're still finding a few ECUs which we have not seen before, and are adding support as we find them. To give you some idea of how many different ECUs Honda uses, we're currently support 49 different ECUs for the L15 turbo Civic.
We'll do a release around noon tomorrow for the 5AA-A66 ECU.
Hondata

DallasJhawk
Posts: 7
Joined: Mon Mar 24, 2014 4:48 pm

Re: FlashPro Cannot Lock to Car

Post by DallasJhawk » Tue Dec 20, 2016 9:16 pm

You guys are awesome! I got a road trip to KC from Dallas tomorrow so by the time i get there ill try and see if the update was done! I promise im not complaining at all. Just a guy with a new toy who is ready to play.

User avatar
Hondata
Site Admin
Posts: 8474
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashPro Cannot Lock to Car

Post by Hondata » Wed Dec 21, 2016 1:46 pm

Here is the release:

http://hondata.com/updates/FlashProMana ... 7-Full.exe

Do not use this on the 2017 Touring yet (A68 ECU).
Hondata

DallasJhawk
Posts: 7
Joined: Mon Mar 24, 2014 4:48 pm

Re: FlashPro Cannot Lock to Car

Post by DallasJhawk » Wed Dec 21, 2016 2:07 pm

Again, thank you so much for the quick after hours response. Going to try to lock it now

DallasJhawk
Posts: 7
Joined: Mon Mar 24, 2014 4:48 pm

Re: FlashPro Cannot Lock to Car

Post by DallasJhawk » Wed Dec 21, 2016 2:32 pm

Locked and Loaded with the +6psi tune!

User avatar
Hondata
Site Admin
Posts: 8474
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashPro Cannot Lock to Car

Post by Hondata » Wed Dec 21, 2016 3:34 pm

Great. Have fun!
Hondata

lebshiff21
Posts: 2
Joined: Thu Feb 02, 2017 9:09 am

Re: FlashPro Cannot Lock to Car

Post by lebshiff21 » Thu Feb 02, 2017 9:12 am

Have the same issue:
error.PNG
error.PNG (8.63 KiB) Viewed 2747 times
My ECU says it's supported on the compatibility checker: 37820-5AN-B52

I submitted the information to Hondata support via FlashPro.

- Serial: FP-16CIVIC-L15T-US-200071
- FlashPro Manager version: 2.5.9.0
- Vehicle: 2017 Civic EX Hatchback
- ECU: 37820-5AN-B52

lebshiff21
Posts: 2
Joined: Thu Feb 02, 2017 9:09 am

Re: FlashPro Cannot Lock to Car

Post by lebshiff21 » Thu Feb 02, 2017 1:34 pm

I was contacted by Juan from Hondata and he gave me a link to a newer version of FlashPro Manager which did the trick. Thanks!

Johne
Posts: 1
Joined: Wed Feb 08, 2017 8:36 am

Re: FlashPro Cannot Lock to Car

Post by Johne » Wed Feb 08, 2017 10:15 am

I'm also getting the same error and submitted to support but still waiting for response.

My ECU says it's supported on the compatibility checker: 37820-5AN-L62

- Serial: FP-16CIVIC-L15T-US-200051
- FlashPro Manager version: 2.5.9.0
- Vehicle: 2017 Civic Sport Hatchback
- ECU: 37820-5AN-L62

tnlong
Posts: 4
Joined: Wed Feb 08, 2017 9:00 pm

Re: FlashPro Cannot Lock to Car

Post by tnlong » Thu Feb 09, 2017 4:51 pm

Ditto

My ECU also says it's supported on the compatibility checker: 37820-5AN-A83

- Serial: FP-16CIVIC-L15T-US-200046
- FlashPro Manager version: 2.5.9.0
- Vehicle: 2017 Civic Sport Touring Hatchback
- ECU: 37820-5AN-A83

Transmitted my info earlier today. Hoping it gets added quickly as I'm getting giddy to test it out.

Thanks for all your hard work guys!

tnlong
Posts: 4
Joined: Wed Feb 08, 2017 9:00 pm

Re: FlashPro Cannot Lock to Car

Post by tnlong » Fri Feb 10, 2017 4:36 pm

lebshiff21 wrote:I was contacted by Juan from Hondata and he gave me a link to a newer version of FlashPro Manager which did the trick. Thanks!

hey lebshiff, was that v2.5.9 or something else? How long does it usually take them to incorporate the new configurations and send out updates?

Jclrk279
Posts: 7
Joined: Sat Jul 07, 2018 10:49 pm

Re: FlashPro Cannot Lock to Car

Post by Jclrk279 » Sun Jul 08, 2018 4:38 pm

Hi, im having trouble locking my 2018 honda civic touring sedan, when I try to lock my flashpro to the vehicle it says unrecognized model. My ECU is 32110-5AA-A740

I have the Newest version of flashpro Installed.

Post Reply