I have a 2006 Acura tl Manual transmission. Mods I have are, 3.7L IM, ZDX TB, 4inch CAI, Ported intake runners, and pocket ported heads.
I recently installed stage 2 cams as well. Ever since then, I have been getting random misfires when the engine is cold at idle. I cannot figure out how to adjust for this.
Any help is appreciated
I have attached a datalog as and my tune as well. Can see the misfires during the idle. These seem to only occur during idle and when the engine is bone cold.
Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)
2 posts • Page 1 of 1