ABS wiring FN2

Post Reply
hoddy
Posts: 14
Joined: Wed May 12, 2010 7:10 pm
Location: Perth Australia

ABS wiring FN2

Post by hoddy » Thu Jan 24, 2013 12:11 am

I have a 2007 FN2 & am fitting the TC
My workshop manual wiring diagram for the ABS is different from the wiring in my car from left to right the first 3 pairs are the same but the last (red & white) is different can someone help me please as to what wire is what
traction control wiring 2.jpg
traction control wiring 2.jpg (183.11 KiB) Viewed 5327 times

User avatar
Hondata
Site Admin
Posts: 8811
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: ABS wiring FN2

Post by Hondata » Thu Jan 24, 2013 7:58 am

Be careful because Red/white are colors used in the CAN bus, which is also a twisted pair, so don't tap into it before you are sure it is a wheel speed sensor.

My guess would be:

Blue/Green = RR
Yellow/Red = LR
Green/Red = RF

So trace the LF ABS wiring and see what color it is.
Hondata

User avatar
R-12914
Posts: 352
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Re: ABS wiring FN2

Post by R-12914 » Wed Feb 18, 2015 5:06 am

Red/Yellow = RL
Green/Blue = RR
Green/Red = FL
Pink/Green = FR
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E03
Flashpro: FP-SI-INT-21153
Software: 3.4.7.0
Firmware: 169

Post Reply