Using a 07-08 5AT ECU in a 03-06 6MT

FlashPro questions & answers specific to the 2007-2008 Acura TL
Post Reply
MrHeeltoe
Posts: 2
Joined: Mon Jan 25, 2010 11:09 am
Contact:

Using a 07-08 5AT ECU in a 03-06 6MT

Post by MrHeeltoe » Wed Sep 27, 2017 3:27 pm

If a person uses a 5AT 07-08 ECU in their older TL or accord 6MT, will they lose the reverse lockout?

Marcus

User avatar
Spunkster
Site Admin
Posts: 17935
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Using a 07-08 5AT ECU in a 03-06 6MT

Post by Spunkster » Wed Sep 27, 2017 4:03 pm

Not that I am aware of. The thing that is lost is the cruise control.

Uncledaves
Posts: 2
Joined: Mon May 07, 2018 7:23 pm

Re: Using a 07-08 5AT ECU in a 03-06 6MT

Post by Uncledaves » Mon May 07, 2018 7:32 pm

Just a quick question about using a AT ECM in my 05TL 6MT.

From reading forums and notes, I have come to the conclusion that in order to use the Flash pro, I need the TL Adaptor harness setup, including the CAN wiring, and then a 07-80 TL ECM. There seems to be a complete lack of used 6MT Tl ecus in the marketplace.

If I use a At 07-08 ECM, I understand the cruise wont work, but Is there a work around for this?

Are there any tuning issues with running a AT ECM in a MT car?>

Looking to tune my J32a motor stroked to 3.7L and need a tuning answer.

Dave

User avatar
Spunkster
Site Admin
Posts: 17935
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Using a 07-08 5AT ECU in a 03-06 6MT

Post by Spunkster » Tue May 08, 2018 10:28 am

Details on this can be found on page 8 at: https://www.hondata.com/images/04-06_tl ... ctions.pdf

Uncledaves
Posts: 2
Joined: Mon May 07, 2018 7:23 pm

Re: Using a 07-08 5AT ECU in a 03-06 6MT

Post by Uncledaves » Tue May 08, 2018 8:04 pm

Thanks,.. i was pretty sure it would work, but wanted a professional opinion.

thanks
Dave

Post Reply