Can PRA ecu use wideband as primary?

K-Series Programmable ECU installation questions / support issues
Post Reply
JackSVM
Posts: 36
Joined: Sun Jan 01, 2017 11:43 am

Can PRA ecu use wideband as primary?

Post by JackSVM »

As the title suggests. I have a PRA ecu on my ep3 and it uses a narrowband lambda sensor from the factory. Can it be made to use a wideband lambda as its primary?

Thanks
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Can PRA ecu use wideband as primary?

Post by Spunkster »

What version K-Pro do you have?
JackSVM
Posts: 36
Joined: Sun Jan 01, 2017 11:43 am

Re: Can PRA ecu use wideband as primary?

Post by JackSVM »

V4
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Can PRA ecu use wideband as primary?

Post by Spunkster »

Yes it can be used to input a wideband signal to run closed loop.

http://www.hondata.com/help/kmanager/an ... b=wideband

This can only be done using a V4 K-Pro.
JackSVM
Posts: 36
Joined: Sun Jan 01, 2017 11:43 am

Re: Can PRA ecu use wideband as primary?

Post by JackSVM »

Aa ok sweet. I already have my wideband on analogue 0 for datalogging but how do I change it over so the ecu uses this input for its lambda readings and to use closed loop?
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Can PRA ecu use wideband as primary?

Post by Spunkster »

You will see it in the closed loop tab of the parameters window.
JackSVM
Posts: 36
Joined: Sun Jan 01, 2017 11:43 am

Re: Can PRA ecu use wideband as primary?

Post by JackSVM »

Ok thanks 👌🏻
Post Reply