B20V (B20/B16) Turbo 7lbs Tune

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
B20vincali
Posts: 4
Joined: Fri Nov 13, 2015 8:32 am

B20V (B20/B16) Turbo 7lbs Tune

Post by B20vincali »

After a long time of not posting, here is the 332wHP Tune I had on 7lbs boost on E85
All stock internals, bolt ons include:
74mm Skunk2 Pro TB
74mm Skunk2 Ultra Intake Manifold
1000cc Grams Injectors
3" Intercooler Piping
Large Intercooler
Godspeed T3/T4 Turbo
2.5" Down pipe, ran all the way back with muffler, no cat/resonator
7lbs Spring

Any questions, feel free to ask.
Attachments
B20V Turbo - 7lbs - 1000cc Grams - 74mm IM and TB - BWR Ram Horn EM.skl
(51.13 KiB) Downloaded 977 times
h10ndr
Posts: 10
Joined: Sun Mar 15, 2009 11:46 am
Location: UK

Re: B20V (B20/B16) Turbo 7lbs Tune

Post by h10ndr »

Thank you. That is close to our setup. Will try use this as a basemap. ta
Tim
http://www.s2kuk.com
http://www.ludegeneration.co.uk
h10ndr
Posts: 10
Joined: Sun Mar 15, 2009 11:46 am
Location: UK

Re: B20V (B20/B16) Turbo 7lbs Tune

Post by h10ndr »

Aren't these fuel values very large overall when compared to stock ? I would have thought with 1000cc injectors the fuel values would be lower?
Tim
http://www.s2kuk.com
http://www.ludegeneration.co.uk
Db2 alex
Posts: 7
Joined: Wed Nov 08, 2017 12:17 pm

Re: B20V (B20/B16) Turbo 7lbs Tune

Post by Db2 alex »

High value fuel because of e85 i think but thanks for posting doing a stock with bolt ons b20v right now going to use this base map to drive the car to the dyno
Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: B20V (B20/B16) Turbo 7lbs Tune

Post by Zperformance »

In my opinion, one of the better tunes i seen so far on the site. jw was this tune on a dyno. Whatsup with the same timing value on vtec?
watchout221
Posts: 19
Joined: Sun Jan 21, 2018 3:18 pm
Location: Medford OR

Re: B20V (B20/B16) Turbo 7lbs Tune

Post by watchout221 »

quick question could i use this map on my b16a2 and using pump gas?

mods list

dropped compression
eagle rods
head studs
4bar map
SF ram horm
1000cc grams
255 grams
aem rail & fpr
3'DP

Thank you
watchout221
Posts: 19
Joined: Sun Jan 21, 2018 3:18 pm
Location: Medford OR

Re: B20V (B20/B16) Turbo 7lbs Tune

Post by watchout221 »

watchout221 wrote: Tue Feb 06, 2018 5:41 am quick question could i use this map on my b16a2 and using pump gas?

mods list

dropped compression
eagle rods
head studs
4bar map
SF ram horm
1000cc grams
255 grams
aem rail & fpr
3'DP

i fully understand using this at my own risk
Thank you
Post Reply