Basemap B18c1 Gt28rs

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Jaythizzo
Posts: 8
Joined: Tue May 17, 2016 2:48 pm

Basemap B18c1 Gt28rs

Post by Jaythizzo »

Need a basemap to drive temporary until i find a tuner.

B18c1 Benson 2.0 block
Stock gsr head
skunk2 im
68mm tb
1000cc ID injectors
255 walbro fuel pump
GT28rs ball bearing turbo .63ar exaust housing
RAMHorn exhaust manifold

Need a similar basemap to run on until i can find a tuner since previous tuner no responding to back to me.
Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: Basemap B18c1 Gt28rs

Post by Zperformance »

There you go bro. Im not sure what your wastegate pressure is at so i set it at 9.9psi if you are higher you can raise it under "Boost cut" parameters. This is a basemap so i would advise to have a wideband. Let me know how it do for you, i will try to help if there is any problem.
Attachments
Gsr2.0 Turbo basemap.skl
*Use at your own risk, i would not be responsible with anything that occur*
(49.74 KiB) Downloaded 293 times
Post Reply