Built B20 vtec need base map to get it to tuner

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Nathan carpenter
Posts: 4
Joined: Wed Mar 23, 2016 8:52 am

Built B20 vtec need base map to get it to tuner

Post by Nathan carpenter »

I'm new to hondata and need to get my car running good enuff to get it to the tuner any help would be appreciated
Specs b20 block bored to 85mm
Eagle rods Wisco 12.5 to 1 comp pistons
B16 head Blox tunner series p2 cams
Blox springs and titanium retainers arp head studs rod bolts and main studs
Stock intake mani
4 to 1 header
Stock injectors
Skunk 2 timing gears
smowkem_built
Posts: 7
Joined: Fri Oct 09, 2015 4:58 am

Re: Built B20 vtec need base map to get it to tuner

Post by smowkem_built »

try this out
Attachments
PRIME_R.skl
(41.45 KiB) Downloaded 1002 times
Nathan carpenter
Posts: 4
Joined: Wed Mar 23, 2016 8:52 am

Re: Built B20 vtec need base map to get it to tuner

Post by Nathan carpenter »

Thanks for the reply I'll give it a try tonight and let you know how it goes
Nathan carpenter
Posts: 4
Joined: Wed Mar 23, 2016 8:52 am

Re: Built B20 vtec need base map to get it to tuner

Post by Nathan carpenter »

Car runs a lot better really appreciate the help
smowkem_built
Posts: 7
Joined: Fri Oct 09, 2015 4:58 am

Re: Built B20 vtec need base map to get it to tuner

Post by smowkem_built »

your welcome... its a tune
Nathan carpenter
Posts: 4
Joined: Wed Mar 23, 2016 8:52 am

Re: Built B20 vtec need base map to get it to tuner

Post by Nathan carpenter »

Car runs lean between 50 and 60 mph in 5 how can I fix that ?
Post Reply