base map needed for h23a1 96 prelude

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
tgossar71
Posts: 1
Joined: Thu Aug 13, 2015 3:46 pm

base map needed for h23a1 96 prelude

Post by tgossar71 » Thu Aug 13, 2015 5:05 pm

i have a 96 prelude with a h23a1 engine, my buddy installed my s300 into a p06 ecu.

has a Honda tuning lab header, msd ignition, light weight fly wheel (if that matters) everything else is stock

please help!

also tried putting a h22a with vtec disabled to see what happens and idle is erratic?

I have a lc-1 that I am going to install once I figure out how to run it to the ecu.

Kongtec
Posts: 1
Joined: Sat Apr 16, 2016 5:43 am

Re: base map needed for h23a1 96 prelude

Post by Kongtec » Sat Jul 22, 2017 11:13 pm

i am running this on my h2b my set up is
h23a1
qsd plate
ls transmission
stock injectors and header

if anything u probably just need to tune the a/f for it

let me know how it goes
Attachments
myh23a1 test.skl
(41.43 KiB) Downloaded 53 times

Post Reply