AFM Flow Voltage

2012+ US/Canadian Civic Si / 2013+ ILX
Post Reply
Slip_Angle
Posts: 78
Joined: Wed Apr 11, 2007 8:26 pm

AFM Flow Voltage

Post by Slip_Angle »

In the 2013 ILX AFM Calibration, the AFM Flow Voltage maxes out at 2.56v. When I do a datalog the AFM.v graph has entries well past that around the 3.7v range. Is there something else I need to enable?

Also, quick note -- you'll notice voltage is mis-spelled "volatge" in this area of the advanced calibration.
Attachments
AFM Voltage.jpg
AFM Voltage.jpg (94.13 KiB) Viewed 3598 times

User avatar
Spunkster
Site Admin
Posts: 18152
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: AFM Flow Voltage

Post by Spunkster »

Our software engineer will look into this.

User avatar
Hondata
Site Admin
Posts: 8881
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: AFM Flow Voltage

Post by Hondata »

This was a unit conversion problem, which we have fixed for the next release.
Hondata

Slip_Angle
Posts: 78
Joined: Wed Apr 11, 2007 8:26 pm

Re: AFM Flow Voltage

Post by Slip_Angle »

Awesome, thanks!

Post Reply