Base map for S2000 with Rotrex kit, Flash pro and ID1000 inj

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
antkouv
Posts: 52
Joined: Fri Apr 26, 2013 10:58 am

Base map for S2000 with Rotrex kit, Flash pro and ID1000 inj

Post by antkouv »

Hi all,

Does anyone have a FlashPro map setup for ID1000 injectors? I only need it for my car to have an ok idling operation and will fully tune it after that.

Thank you.

Antony
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Base map for S2000 with Rotrex kit, Flash pro and ID1000

Post by Hondata »

You need to use S2000-US-7-Supercharger as a base and then import the injector flow & dead times from S2000-US-8-ID1000.
Hondata
S2000443
Posts: 5
Joined: Fri Feb 27, 2015 12:28 pm

Re: Base map for S2000 with Rotrex kit, Flash pro and ID1000 inj

Post by S2000443 »

Can we get an ID 1300 cc injector flow and dead times added to software or maybe you can post it here so I can add this to the supercharger calibration map you have. Thanks
Post Reply