2013 si maps

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Locked
spyder0314
Posts: 8
Joined: Thu Jun 06, 2013 10:11 am

2013 si maps

Post by spyder0314 »

Any plans on having maps for the 13 si other than the stock equivalent? I have an intake and flashpro and im running 10.14 rich at wot on stock calibration.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 2013 si maps

Post by Spunkster »

If you download the most recent beta version you will see that there are a number of calibrations that will work on a 2013.
mikeos
Posts: 5
Joined: Mon Jun 03, 2013 6:22 pm

Re: 2013 si maps

Post by mikeos »

im having problems seeing any different calibrations other then stock.. I thought I would see something that would be similar to the mods I added.. I have a 2012 civic si..
spyder0314
Posts: 8
Joined: Thu Jun 06, 2013 10:11 am

Re: 2013 si maps

Post by spyder0314 »

The only cal is see for 13 si is the stock equivalent for stock310 injctors. I see reflash but thats for the 2012, i dd compare the 2 cal and they look identical.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 2013 si maps

Post by Spunkster »

Download the most recent beta version of software from the downloads section of the website.
spyder0314
Posts: 8
Joined: Thu Jun 06, 2013 10:11 am

Re: 2013 si maps

Post by spyder0314 »

i got the new beta which is the 1.5.6 and all the calibrations i see for the 13 si on stock injector is the stock equivalent and the 2012 stock reflash. Does the 2012 stock reflash work as well in the 2013? I compared both the stock equivalent and the reflash and all i see the difference are just fuel and rev limits. Cams and ignitions are the same for both.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 2013 si maps

Post by Spunkster »

They are all interchangeable. YOu can use 2012 calibrations in a 2013.
battlemike
Posts: 4
Joined: Tue Sep 27, 2011 7:36 pm

Re: 2013 si maps

Post by battlemike »

Spunkster wrote:Download the most recent beta version of software from the downloads section of the website.
I know I'm waking the dead here...but there is zero difference in the "Hondata reflash" of the 2012 and 2013 stock equivalent. Unless you count the rev limiter being raised. I would think you guys would have the hondata reflash available for the flashpro...especially since it costs more.
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: 2013 si maps

Post by Hondata »

1. There are exactly the same number of starting calibrations available for the 2013 as the 2012 Si (currently 8 for each).
2. Between the 'stock equivalent' and 'reflash' calibrations the fuel, ignition, knock retard, knock ignition limit, overrun fuel, rev limit and throttle tables are different.
Hondata
battlemike
Posts: 4
Joined: Tue Sep 27, 2011 7:36 pm

Re: 2013 si maps

Post by battlemike »

Hondata wrote:1. There are exactly the same number of starting calibrations available for the 2013 as the 2012 Si (currently 8 for each).
2. Between the 'stock equivalent' and 'reflash' calibrations the fuel, ignition, knock retard, knock ignition limit, overrun fuel, rev limit and throttle tables are different.
not from what I'm seeing. I looked at both and there is no difference. Perhaps this wasn't caught and has continued on during the upgrades. I'm not the only one seeing this.

I uninstalled flashpro manager and reinstalled it...they are both the same. Unless I need to look at something else? I was looking at the tables for low/high on fuel, ignition and cam...all were the same for the reflash and stock equivalent.
battlemike
Posts: 4
Joined: Tue Sep 27, 2011 7:36 pm

Re: 2013 si maps

Post by battlemike »

Okay I did a complete analysis of both the calibrations and put the screen shots in pdf format. I have it set to show the first table of ignition of the stock, then the reflash, so on and so on.

I found a couple of small minor differences, which imo...are nothing major.

The only changes shown are (which are very minor and only under fuel tables):

1. Under the low WOT lambda table for columns 8, 9, 10 at 4000 rpms. Stock shows each of those to be 12.46, while the reflash shows 11.69.

2. Under the high WOT lambda table for columns 9, 10 at 7000 rpms. Stock shows 12.06, while reflash shows 12.46.

So other than that and the fact that the rev limit was increased...those are the only differences. How you guys think that is a reflash is beyond me. Very disappointing. Like I said, I'm glad I have Vit that will tune my car. But for those that order flashpro and don't have the money/time to get it tuned yet...that's a rip off. At least give them the supposed reflash you guys made.

Below is the comparison. Please school me completely if I am wrong, but I don't see how I am. I will have zero problems admitting I'm wrong. But I've run the reflash and it feels practically the same as the stock tune.

https://www.dropbox.com/s/cu9evn5feo1wj6u/compare.pdf
battlemike
Posts: 4
Joined: Tue Sep 27, 2011 7:36 pm

Re: 2013 si maps

Post by battlemike »

Just did an analysis of the throttle parameters, etc...no difference there either. I'm awaiting for you guys to correct me.....................................
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: 2013 si maps

Post by Hondata »

I've had to delete your last post - we will not tolerate abuse on this forum.
Hondata
Locked