Sharing Tuned K24a2 basemap

K-Series Programmable ECU Calibration updates / downloads
Post Reply
1320k24EK
Posts: 24
Joined: Tue Dec 17, 2013 5:59 pm

Sharing Tuned K24a2 basemap

Post by 1320k24EK »

Was asked to remove, sorry!
Last edited by 1320k24EK on Sun May 18, 2014 7:36 pm, edited 2 times in total.
tkane4389
Posts: 31
Joined: Wed Jun 06, 2012 5:02 pm
Location: Kansas City

Re: Sharing Tuned K24a2 basemap

Post by tkane4389 »

Strange to have a 50* vtc and never advance past 23*. You make power with kelfords like that? The 179b's in my frank love almost full advance throughout the entire gear.
1320k24EK
Posts: 24
Joined: Tue Dec 17, 2013 5:59 pm

Re: Sharing Tuned K24a2 basemap

Post by 1320k24EK »

Yea I'm doubting that it has a 50* vtc gear installed. This is actually a friends tune that I'm sharing so I gave the info that he had given me. I bet if the valve cover was pulled off it would reveal a 25* gear. Also, to me the power seems low for the compression it claims to have.

I'll be posting mine in the next couple of weeks which I have all the details for. It's a complete internally stock K24a2 w/ 50* VTC gear and I/H/E.
1320k24EK
Posts: 24
Joined: Tue Dec 17, 2013 5:59 pm

Re: Sharing Tuned K24a2 basemap

Post by 1320k24EK »

I should also add, he bought the car this way and had been given a list of the modifications done so the only way to verify what has been done would be to tear it down, something that he is not capable of doing.
tkane4389
Posts: 31
Joined: Wed Jun 06, 2012 5:02 pm
Location: Kansas City

Re: Sharing Tuned K24a2 basemap

Post by tkane4389 »

1320k24EK wrote:I should also add, he bought the car this way and had been given a list of the modifications done so the only way to verify what has been done would be to tear it down, something that he is not capable of doing.
Right on. I just didnt think it was dyno tuned, and if it was they didnt take very much time to make the fuel curves parallel.
1320k24EK
Posts: 24
Joined: Tue Dec 17, 2013 5:59 pm

Re: Sharing Tuned K24a2 basemap

Post by 1320k24EK »

It is indeed dynotuned.
Last edited by 1320k24EK on Sun May 18, 2014 7:36 pm, edited 1 time in total.
tkane4389
Posts: 31
Joined: Wed Jun 06, 2012 5:02 pm
Location: Kansas City

Re: Sharing Tuned K24a2 basemap

Post by tkane4389 »

The car may have only reached to column 8 on map, but they just left columns 9 and 10 the same. Over all looks alright, just odd of them to do that.
1320k24EK
Posts: 24
Joined: Tue Dec 17, 2013 5:59 pm

Re: Sharing Tuned K24a2 basemap

Post by 1320k24EK »

You're right about it only reaching column 8. Any reasons why that would be?
Last edited by 1320k24EK on Sun May 18, 2014 7:37 pm, edited 1 time in total.
tkane4389
Posts: 31
Joined: Wed Jun 06, 2012 5:02 pm
Location: Kansas City

Re: Sharing Tuned K24a2 basemap

Post by tkane4389 »

1320k24EK wrote:You're right about it only reaching column 8. Any reasons why that would be?

Just curious because I'm getting my car tuned by the same tuner next Friday, the 16th. I'll also be sharing my tune for others to use and would like feedback as well.
Nothing to worry about, every car is different. Some reach column 10 na, some don't. I sent you a pm.
Post Reply