PRC KPRO + Traction Control

Post Reply
dantok
Posts: 12
Joined: Mon Oct 08, 2012 10:12 pm

PRC KPRO + Traction Control

Post by dantok »

Hey Guys,
I have the TC Unit, just wanted to make sure it will work with the PRC KPRO V3 ecu that i have.

Please advise :)

User avatar
Hondata
Site Admin
Posts: 9144
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: PRC KPRO + Traction Control

Post by Hondata »

The PRC does not support the ELD input, which is the preferred TC input.
Hondata

dantok
Posts: 12
Joined: Mon Oct 08, 2012 10:12 pm

Re: PRC KPRO + Traction Control

Post by dantok »

Yikes.
What are my options here? Am i able to buy a PRB ECU and transfer the traction control unit over?
Or can i use the other output available?

Sorry i`m a little lost, isn't the ELD input the same input for the O2 sensor?

User avatar
Spunkster
Site Admin
Posts: 18594
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: PRC KPRO + Traction Control

Post by Spunkster »

Correction, ELD input does work on a PRC. I tested this on the bench yesterday.

Knox
Posts: 122
Joined: Mon Jun 06, 2011 6:01 pm

Re: PRC KPRO + Traction Control

Post by Knox »

Spunkster wrote:Correction, ELD input does work on a PRC. I tested this on the bench yesterday.

So, prc ecus (also prd ecus) can use the traction control easyly ?

User avatar
Spunkster
Site Admin
Posts: 18594
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: PRC KPRO + Traction Control

Post by Spunkster »

Yes they should work.

Post Reply