ABS wiring FN2

Post Reply
Posts: 14
Joined: Wed May 12, 2010 7:10 pm
Location: Perth Australia

ABS wiring FN2

Post by hoddy »

I have a 2007 FN2 & am fitting the TC
My workshop manual wiring diagram for the ABS is different from the wiring in my car from left to right the first 3 pairs are the same but the last (red & white) is different can someone help me please as to what wire is what
traction control wiring 2.jpg
traction control wiring 2.jpg (183.11 KiB) Viewed 9775 times
User avatar
Site Admin
Posts: 9609
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA

Re: ABS wiring FN2

Post by Hondata »

Be careful because Red/white are colors used in the CAN bus, which is also a twisted pair, so don't tap into it before you are sure it is a wheel speed sensor.

My guess would be:

Blue/Green = RR
Yellow/Red = LR
Green/Red = RF

So trace the LF ABS wiring and see what color it is.
User avatar
Posts: 354
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Re: ABS wiring FN2

Post by R-12914 »

Red/Yellow = RL
Green/Blue = RR
Green/Red = FL
Pink/Green = FR
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Firmware: 185
Post Reply