Final Drive

FlashPro questions & answers specific to the 2007-2008 US TSX
Post Reply
dinoc
Posts: 116
Joined: Wed May 16, 2007 4:35 am

Final Drive

Post by dinoc »

Hi,

Will the Cruise Control and VSA still work with FlashPro if I change the Final Drive (putting a bigger one) ?

(regarding real speed , I'm planning to use a Dakota Digital SGI-5 to fix the speed with the new FD). I hope there is no interference with Flash Pro.

Thanks
Euro Honda Accord CL9
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Final Drive

Post by Hondata »

The use of FlashPro does not change any of the electronics in the vehicle nor the VSA operation. So the effect of changing the final drive and using a speed converter on the VSA, dash and cruise control is independent of the use of a FlashPro.

The question you probably should ask is whether you can change the ECU gear ratios using FlashPro for the ECU internal gear determination and cruise control. We have not tested this yet.
Hondata
dinoc
Posts: 116
Joined: Wed May 16, 2007 4:35 am

Re: Final Drive

Post by dinoc »

Any plans to make this work ?
There are a lot of people out there running custom gears in their TSX-es.
I want to switch for custom gears but I don't want to loose the CC .
Euro Honda Accord CL9
beaugus
Posts: 35
Joined: Wed Dec 08, 2010 12:20 am

Re: Final Drive

Post by beaugus »

+1 for this feature to be added to Flashpro. It's the very last outstanding issue to re-enable cruise control for us :-)
Zoro2006
Posts: 119
Joined: Sun May 02, 2010 3:07 am

Re: Final Drive

Post by Zoro2006 »

+1 would be nice feature for guys with PPG
Known as Vaikis_
Post Reply