TC on RSX Problems
TC on RSX Problems
I started writing about my problem in this topic
http://www.hondata.com/forum/viewtopic.php?f=42&t=14710
Test in TC manager (ECU command output test) helped make sure that the right comes on ELD.
But if I turn on the test over slip, the only change in the value Kmanager ELD, is this normal? I enclose a screen shot. The machine is not a standstill, the engine on idle. including tests over slip.
After I recorded datalog with slip on 1 and 2 gears. (The extension csv is not allowed, i reneme .csv to .kal)
Thanks!!!
http://www.hondata.com/forum/viewtopic.php?f=42&t=14710
Test in TC manager (ECU command output test) helped make sure that the right comes on ELD.
But if I turn on the test over slip, the only change in the value Kmanager ELD, is this normal? I enclose a screen shot. The machine is not a standstill, the engine on idle. including tests over slip.
After I recorded datalog with slip on 1 and 2 gears. (The extension csv is not allowed, i reneme .csv to .kal)
Thanks!!!
- Attachments
-
- 2-27102012.kal
- (163.34 KiB) Downloaded 512 times
-
- фотография.JPG (81.24 KiB) Viewed 16420 times
Last edited by Max358 on Sat Oct 27, 2012 11:27 am, edited 1 time in total.
Re: Is this enough for working Traction Control?
The default settings in KManager should work for you.
Hondata
Re: TC on RSX Problems
I update topic, help please!
Thanks!!!
Thanks!!!
Re: TC on RSX Problems
Hondata
Re: TC on RSX Problems
Yes of course (3.2.0), the settings uploaded a new version with a laptop
kmanager should show what that other information besides ELD.V?
kmanager should show what that other information besides ELD.V?
Re: TC on RSX Problems
no, only TC. do today, thanks!
Re: TC on RSX Problems
I plugged KPro and TC plugged into the USB, Speed began to show in the parameters Kmanager, the settings uploaded to ECU. But things are still did not help me.
Datalog of Kpro attached.
In Moscow cold weather now, slippery :)
Thanks!!!
Datalog of Kpro attached.
In Moscow cold weather now, slippery :)
Thanks!!!
- Attachments
-
- datalog kpro.kdl
- (745.29 KiB) Downloaded 486 times
Re: TC on RSX Problems
YOu need to post your calibration, datalogs as well as the traction control calibration file used.
Re: TC on RSX Problems
I attach my firmware Kpro
And the configuration file TC (default "RSX" 2006 2006), there is almost no change settings
And the configuration file TC (default "RSX" 2006 2006), there is almost no change settings
- Attachments
-
- 2006RSX.tcc
- (1.18 KiB) Downloaded 502 times
Last edited by Max358 on Wed Jun 19, 2013 4:16 am, edited 1 time in total.
Re: TC on RSX Problems
CHeck yout TCC file, as it appears you have it set to a rear wheel drive vehicle.
Re: TC on RSX Problems
This is the default value for "RSX2006") Thank you! In the evening, I can check!)
Hurray!!! TC is working!!!
Hard to believe I did not notice that the selected rear-wheel drive.
You are planning fix the default setting for "RSX 2006"? If you look "Slip setup" Cornering for RSX is very similar to S2000
Very much like that would have been a settings file for my car with basic settings made by experts
Hurray!!! TC is working!!!
Hard to believe I did not notice that the selected rear-wheel drive.
You are planning fix the default setting for "RSX 2006"? If you look "Slip setup" Cornering for RSX is very similar to S2000
Very much like that would have been a settings file for my car with basic settings made by experts
Re: TC on RSX Problems
Traction Control Calibrations which I use for RSX turbo (DC5)?
What is the difference and 2006civicSC 2006civicTC? What kind of car models?
Thanks!
What is the difference and 2006civicSC 2006civicTC? What kind of car models?
Thanks!
Re: TC on RSX Problems
2006SC is for a 270 hp supercharger car. 2006TC is for a 500+ hp turbocharged car.
Hondata
Re: TC on RSX Problems
Who is your tuner in Moscow?Max358 wrote:This is the default value for "RSX2006") Thank you! In the evening, I can check!)
Hurray!!! TC is working!!!
Hard to believe I did not notice that the selected rear-wheel drive.
You are planning fix the default setting for "RSX 2006"? If you look "Slip setup" Cornering for RSX is very similar to S2000
Very much like that would have been a settings file for my car with basic settings made by experts
Cr-v RD8+K24A2turbo+Kpro V4 prb+NPR3/6Speed+ТС+ HFS4 v3.2.
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper