Proposed Fixes:
- Download button in calibration is disabled (the version that I used before was 1.1.6.7 and was OK)
- Datalog stops when engine starts (whats the corrected procedure to datalog engine start/crank?)
- The selection in Graph (3D) by selecting the values in table (BLUE selection) is in a different position than selection with datalog (RED selection – correct one) ; Graph in 2D is correct.
- Changing the Display with a selected control causes a crash. Steps to reproduce:
- Load (tuning display, for example)
- Unlock Controls in Display
- Select a (Bar Graph) for example
- Load new Display (itr full display)
- Left Double-click in Display background
- (Access violation)
- Subtract “x%” by pressing “Ctrl+J” gives a wrong value
- Choose “Print” option in menu show a error window (large one) with nothing else than title named “Error” if no printer is configured
- Background image in Display or in a new Image Control (jpg files are shown transparently; bmp are shown correctly)
- Window “Graph” stays with name after closing the datalog.
- Select “Secondary Oxygen Sensor” in “Close Loop” parameter causes “LAF voltage” to be resized
- This was made with Windows Xp and probably because default Windows theme
- Display
- - Del shortcut to delete a control (only available when is unlock display)
- New “Action” to change to other display with property (Display Path)
- New properties in buttons: Shortcut and Visibility
- A new control to graph a sensor like (Graph window in datalog)
- Clear the controls in display window with a menu option in “Display” (to start a new display it helps a lot)
- Auto Resize Display to change the controls dimension in different resolutions
- Sounds/Alerts with the possibility to choose from a file (this gives a lot of work)
- - New configuration with unit Mph/Kph
- Button to allow the units to be applied for all the values that use that unit
- - Import/Export some configuration parameters and/or templates (for new versions and different pc’s, very useful)
- Option to disable “graph window” and/or “sensors window” and apply it if Display is in “fullscreen” mode to allow responsiveness, free memory and less amount of objects in memory.
- OBDII Diag with a “Refresh” option to update, i.e., like Sensors window