Max speed Group N

insomnia · Post by **insomnia** » Sun Aug 23, 2009 10:39 am

Is there a speed limit in the calibration of the group N?
I test with my car... below 210 kph??? :shock:

I have datalogging of this test...

Post by **Spunkster** » Mon Aug 24, 2009 11:23 am

Are you experiencing a speed limit?

insomnia · Post by **insomnia** » Mon Aug 24, 2009 11:49 am

Yes with default Group N calibration
I attach datalogging...

check in -> 6'

Post by **Spunkster** » Mon Aug 24, 2009 5:06 pm

we'll double check this

insomnia · Post by **insomnia** » Tue Aug 25, 2009 2:44 am

I change gear form 5th to 4th and 5th again and always 210kph ;(

Thanks

insomnia · Post by **insomnia** » Sat Aug 29, 2009 5:16 am

it's necessary send information from FlashProManager?
V1.1.0.8 fix this problem?

Post by **Hondata** » Sat Aug 29, 2009 1:03 pm

We've checked, and there is not speed limiter. On your datalog, which I can't open, do the injectors shut off?

insomnia · Post by **insomnia** » Sat Aug 29, 2009 6:33 pm

I upload again, and not problem... :shock:

Viewing datalogging appear 91-92% TPedal when is 100% and speedometer (kph/mph) is not the same in log

And some question/suggestion... it's possible when cruise control is ON VTEC start always in upper Window rpm? (not at lower) :?:

rikitaun · Post by **rikitaun** » Sun Aug 30, 2009 8:09 am

desde 6500 rpm vas encharcado de gasolina 11-11.5 A/F quitale un 9% de sofa y dejalo en 12.5-12.7 a/f

insomnia · Post by **insomnia** » Sun Aug 30, 2009 12:42 pm

rikitaun wrote:desde 6500 rpm vas encharcado de gasolina 11-11.5 A/F quitale un 9% de sofa y dejalo en 12.5-12.7 a/f

buenasss me suena tu nick :D de clubcivic?

Como ves que va la mezcla tan rica??

rikitaun · Post by **rikitaun** » Mon Aug 31, 2009 7:24 am

insomnia wrote:
rikitaun wrote:desde 6500 rpm vas encharcado de gasolina 11-11.5 A/F quitale un 9% de sofa y dejalo en 12.5-12.7 a/f
buenasss me suena tu nick :D de clubcivic?

Como ves que va la mezcla tan rica??

sip, y foroctr y hondaspirit jajajajaajajaj

lo tienes en el sensor de A/F que te indica la mezcla que llevas

14.7 o lambda 1 para ir en closeloop y gastar lo minimo
12.5-12.7 A/F o 0.86 lambda pie a fondo es lo mejor

insomnia · Post by **insomnia** » Mon Aug 31, 2009 9:36 am

Como no soy un guru del tema, voy recopilando toda la información en el foro por aquí :lol: