Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
-
aroon
- Posts: 2
- Joined: Wed Feb 13, 2008 4:43 am
Post
by aroon »
whats the difference between this and a b18c-r ?????
-
Spunkster
- Site Admin
- Posts: 22807
- Joined: Fri Sep 20, 2002 5:06 pm
- Location: Hondata
Post
by Spunkster »
USDM B18C5 has 10.6:1 compression
JDM B18C has 11.1:1 compression
-
dcvt16
- Posts: 2
- Joined: Tue Aug 19, 2008 5:03 pm
Post
by dcvt16 »
sorry if in wrong place, please delete if so.
do you have a base map for the jdm b18c-r ?
LimitlessPowR
-
EKJOE
- Posts: 18
- Joined: Tue Sep 16, 2008 10:12 am
Post
by EKJOE »
I am unable to download this, You guys know the link is down?
-
omarly
- Posts: 4
- Joined: Wed Oct 22, 2008 8:52 pm
Post
by omarly »
EKJOE wrote:I am unable to download this, You guys know the link is down?
bump
Civic B
-
Spunkster
- Site Admin
- Posts: 22807
- Joined: Fri Sep 20, 2002 5:06 pm
- Location: Hondata
Post
by Spunkster »
Just go to file, new. The base calibrations are built into the software.
-
EKJOE
- Posts: 18
- Joined: Tue Sep 16, 2008 10:12 am
Post
by EKJOE »
The one ITR i see is for a 2001, Is that the same as this one?
-
CSAS
- Posts: 26
- Joined: Wed Nov 05, 2008 9:50 pm
Post
by CSAS »
Spunkster wrote:yes
I isnt available anymore.
Im looking for a basemap for a 00 ITR (JDM)
Can you put it again?
-
Veyron
- Posts: 15
- Joined: Mon Feb 09, 2009 10:24 am
Post
by Veyron »
because many downloads do not work?
-
EK9 Rx
- Posts: 6
- Joined: Mon Jan 19, 2009 10:53 am
Post
by EK9 Rx »
I have read the announcement.. But still the question because i need to drive 200 miles before i get to the tuner after my swap...
I need a basemap for my engineswap. Im getting the B18C-R JDM.
Can i use the stock map that comes with the software or do i need something else?
-
98spec
- Posts: 3
- Joined: Mon Dec 28, 2009 1:14 am
Post
by 98spec »
please upload again