Blue screen when plugging in RE4 cable.
Blue screen when plugging in RE4 cable.
I have windows XP, with the newest version of RE4.
1.0.9.0
I just purchased the RE4 cable. Went to plug it in with the software open, and get a blue screen, and the computer resets on the account of a 'fatal error'
This computer is a refurbished IBM T40. Is there anything that you all have seen similar to this issue? I havent had any troubles with Smanager or Kpro, both of which I have used on this laptop and have had no issues.
I have a number of other ECU software programs on here if that makes a difference with any of the USB drivers. (motec, old and newer V3, electromotive, accel, AEM).
Thanks!
sander
1.0.9.0
I just purchased the RE4 cable. Went to plug it in with the software open, and get a blue screen, and the computer resets on the account of a 'fatal error'
This computer is a refurbished IBM T40. Is there anything that you all have seen similar to this issue? I havent had any troubles with Smanager or Kpro, both of which I have used on this laptop and have had no issues.
I have a number of other ECU software programs on here if that makes a difference with any of the USB drivers. (motec, old and newer V3, electromotive, accel, AEM).
Thanks!
sander
learning.
For those of you that have this problem, follow the driver fix instructions to the letter posted here.
http://www.hondata.com/techre4ftdiupdate.html
Your problems will be no more.
Sander
http://www.hondata.com/techre4ftdiupdate.html
Your problems will be no more.
Sander
learning.
Re: Blue screen when plugging in RE4 cable.
Hi i have the same problem on RE4 0191 cable. I've used the usb fix from the site for 0171 but still having that blue scren error. you think i need a usb fix for 0191? thanks in advance..sander wrote:I have windows XP, with the newest version of RE4.
1.0.9.0
I just purchased the RE4 cable. Went to plug it in with the software open, and get a blue screen, and the computer resets on the account of a 'fatal error'
This computer is a refurbished IBM T40. Is there anything that you all have seen similar to this issue? I havent had any troubles with Smanager or Kpro, both of which I have used on this laptop and have had no issues.
I have a number of other ECU software programs on here if that makes a difference with any of the USB drivers. (motec, old and newer V3, electromotive, accel, AEM).
Thanks!
sander
Have you followed the instructions at the bottom of the page for the blue screen error?
http://www.hondata.com/techre4ftdiupdate.html
http://www.hondata.com/techre4ftdiupdate.html
Yes i have followed the instruction but still having the same issues when plugging in the RE4 cable and open the RE4, still getting the blue screen error and my laptop shuts off and restarts.. i have a #0191 cable.Spunkster wrote:Have you followed the instructions at the bottom of the page for the blue screen error?
http://www.hondata.com/techre4ftdiupdate.html
What start and what step?
Stop 0x000008E in usbport.sys
If you get a 'blue screen of death' with this message, then you have successfully disregarded instructions so far, and your USB drivers have been updated without the fix being run. If you are getting a 'blue screen of death' with a different message than above, it is not from the FTDI USB drivers. Blame something else.
The V2.04.06 (or later) FTDI drivers must be uninstalled and replaced with older version FTDI drivers so that the driver fix can be run.
Unplug all non-vital USB devices.
Download the driver fix setup file here.
Run the setup file.
Run the FTDI driver clean utility (Start menu, 'Programs', 'Hondata', 'FTDI Driver Clean'). Select 'Clean System'.
Plug in the RomEditor4 cable. When prompted for USB drivers, select C:\Program Files\RomEditor4USBFix.
Run the driver fix utility (Start menu, 'Programs', 'Hondata', 'FTDI USB Driver Fix').
Repeat #6 for any other RomEditor4 cables.
Uninstall the driver fix utility (Start menu, 'Programs', 'Hondata', 'Uninstall FTDI Driver Fix').
Download and re-install RomEditor4.
Open the device manager.
Rick click on 'Hondata USB/Serial', and select 'Update Driver...'. If prompted, select the RomEditor4 installation directory for the drivers.
Stop 0x000008E in usbport.sys
If you get a 'blue screen of death' with this message, then you have successfully disregarded instructions so far, and your USB drivers have been updated without the fix being run. If you are getting a 'blue screen of death' with a different message than above, it is not from the FTDI USB drivers. Blame something else.
The V2.04.06 (or later) FTDI drivers must be uninstalled and replaced with older version FTDI drivers so that the driver fix can be run.
Unplug all non-vital USB devices.
Download the driver fix setup file here.
Run the setup file.
Run the FTDI driver clean utility (Start menu, 'Programs', 'Hondata', 'FTDI Driver Clean'). Select 'Clean System'.
Plug in the RomEditor4 cable. When prompted for USB drivers, select C:\Program Files\RomEditor4USBFix.
Run the driver fix utility (Start menu, 'Programs', 'Hondata', 'FTDI USB Driver Fix').
Repeat #6 for any other RomEditor4 cables.
Uninstall the driver fix utility (Start menu, 'Programs', 'Hondata', 'Uninstall FTDI Driver Fix').
Download and re-install RomEditor4.
Open the device manager.
Rick click on 'Hondata USB/Serial', and select 'Update Driver...'. If prompted, select the RomEditor4 installation directory for the drivers.