Hondata and ZEX Wet Kit?

Hondata installation questions / answers / issues.
Locked
DevineCRX
Posts: 39
Joined: Wed Aug 27, 2003 8:14 am

Hondata and ZEX Wet Kit?

Post by DevineCRX »

know that Hondata has the option to control nitrous using a dry kit. Is it possible to get hondata to work with the ZEX Wet kit?? I would still like to use the ZEX Nitrous Management Unit to active the nitrous and fuel, but have hondata retard timing when the nitrous is active..any ideas?
QUICKSILVER RACING
Posts: 351
Joined: Fri Aug 16, 2002 10:45 pm
Location: PHILIPPINES
Contact:

Post by QUICKSILVER RACING »

Yes. Just put 0 in the fuel and it will not add fuel when it activates NOS.
HONDATA official and sole Distributor in the Philippines.
http://quicksilver.4t.com
+639178954747
DevineCRX
Posts: 39
Joined: Wed Aug 27, 2003 8:14 am

Post by DevineCRX »

i figured i could do that..the problem im having is how to hook it up to the ecu to know that the ZEX kit is active...i still want to be able to use the ZEX box to activate the nitrous and fuel...
QUICKSILVER RACING
Posts: 351
Joined: Fri Aug 16, 2002 10:45 pm
Location: PHILIPPINES
Contact:

Post by QUICKSILVER RACING »

Please send the wiring diagram in my email so we can figure it out.

I also reconfigured my nos system using only one solenoid.
HONDATA official and sole Distributor in the Philippines.
http://quicksilver.4t.com
+639178954747
DevineCRX
Posts: 39
Joined: Wed Aug 27, 2003 8:14 am

Post by DevineCRX »

thanks..ill get the diagram and send it to you..
DevineCRX
Posts: 39
Joined: Wed Aug 27, 2003 8:14 am

Post by DevineCRX »

here is 2 ways i came up with...Will one of these solutions work?

Image
QUICKSILVER RACING
Posts: 351
Joined: Fri Aug 16, 2002 10:45 pm
Location: PHILIPPINES
Contact:

Post by QUICKSILVER RACING »

With your diagram, you wouldnt be sure if hondata is actually retarding the timing.

Here's what I think should be done.

1. Connect your relay #85 to +12V
2. Connect #86 to ECU A20.
3. Connect #30 to GND
4. Connect #87 to NMU GND
5. Connect ECU B8 to a switched GND.

THis set-up will allow hondata to fully control when
the nitrous operates. You also need to set-up your nitrous engagement points with your hondata.[/img]
HONDATA official and sole Distributor in the Philippines.
http://quicksilver.4t.com
+639178954747
Locked