Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
albastiki
Posts: 25 Joined: Sat Mar 01, 2008 4:30 am
Location: kingdom of bahrain
Post
by albastiki » Thu Apr 10, 2008 3:00 pm
Hi there, actually I'm looking for base map for the following parts with B16a engine 9.3:1 compression with Ross pistons and eagle connecting rods, skunk2 intake manifold. The injectors I have are FIC 1050cc, Aeromotive Fuel Pressure Regulator, Hondata 4 bar map sensor and 3/t4 60-1/.63stage 3 garrett. thanks anyone can help me out to start the car since I have idle surge problem with big injectors. I even need the MAF calibration to run the Hondata 4 bar map sensor.
thanks......
albastiki
Garrett_si
Posts: 248 Joined: Wed May 17, 2006 9:49 am
Post
by Garrett_si » Thu Oct 02, 2008 3:28 pm
the MAP not the MAF
in parameters > map, select omin/hondata 4 bar
albastiki
Posts: 25 Joined: Sat Mar 01, 2008 4:30 am
Location: kingdom of bahrain
Post
by albastiki » Fri Oct 03, 2008 7:06 am
Thanks man for help, but still need a calibration to run my car.
Dos any body have a base map to run my car at around 20 to 25 psi
albastiki
Garrett_si
Posts: 248 Joined: Wed May 17, 2006 9:49 am
Post
by Garrett_si » Fri Oct 03, 2008 2:07 pm
albastiki wrote: Thanks man for help, but still need a calibration to run my car.
Dos any body have a base map to run my car at around 20 to 25 psi
don't use any calibration files for your big setup
tune it
albastiki
Posts: 25 Joined: Sat Mar 01, 2008 4:30 am
Location: kingdom of bahrain
Post
by albastiki » Sat Oct 04, 2008 3:57 am
thanks bro,,
but any caliration around 15 to 18 psi??? coz we i dont have any tuner in my location and i want to run my car more than 15 psi..
albastiki
cardinal811
Posts: 123 Joined: Tue Jan 02, 2007 11:18 am
Post
by cardinal811 » Sat Dec 20, 2008 10:40 pm
Why are you worried about the PSI factor and not the power?
Bragging rights or something?
albastiki
Posts: 25 Joined: Sat Mar 01, 2008 4:30 am
Location: kingdom of bahrain
Post
by albastiki » Sun Dec 21, 2008 4:21 am
cardinal811 wrote: Why are you worried about the PSI factor and not the power?
Bragging rights or something?
Hello
No, Sir, I am not concerned in this regard but I need to help because I do not have any qualified person to improve the car in the area where I live
albastiki
Garrett_si
Posts: 248 Joined: Wed May 17, 2006 9:49 am
Post
by Garrett_si » Sun Dec 21, 2008 5:59 am
all turbo setup are different
you need to tune it, and if there is nobody to tune it, you need to make it yourself
albastiki
Posts: 25 Joined: Sat Mar 01, 2008 4:30 am
Location: kingdom of bahrain
Post
by albastiki » Sun Dec 21, 2008 7:21 am
Thank you very much brothers for the responses, and I will try to tune my car with myself
albastiki
OTT
Posts: 62 Joined: Wed Sep 15, 2004 7:48 am
Location: Yorkshire, England
Contact:
Post
by OTT » Mon Jan 12, 2009 3:08 pm
drop me a mail i can help you!
ek9turbo @ live.co.uk