how to convert my bin from my chip (s200) to the s300 ???

ROM Editor 4 tuning software questions and answers.
Locked
User avatar
Spunkster
Site Admin
Posts: 22703
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

You will have to take it to a Hondata dealer to have them read the chip out and then upload it to the s300.
V-Spec race development
Posts: 192
Joined: Wed Aug 22, 2007 12:41 am

Post by V-Spec race development »

Can you tell us how do I go about doing so?
User avatar
Spunkster
Site Admin
Posts: 22703
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

File, Open, locate the bin file (RE4 file if from Romeditor 4) and open it.

http://www.hondata.com/help/smanager/up ... conversion
V-Spec race development
Posts: 192
Joined: Wed Aug 22, 2007 12:41 am

Post by V-Spec race development »

So here's what i did: I open Smanager, went to file, open, click on the program files, romeditor 4, open my bin file w/c is 32kb and it says: "this file is not a rom image" Could not open.
User avatar
Spunkster
Site Admin
Posts: 22703
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

it must be saved as an RE4 file, not a bin
V-Spec race development
Posts: 192
Joined: Wed Aug 22, 2007 12:41 am

Post by V-Spec race development »

Spunkster wrote:it must be saved as an RE4 file, not a bin
Oh I got ya. I'll try that and thank you.
V-Spec race development
Posts: 192
Joined: Wed Aug 22, 2007 12:41 am

Post by V-Spec race development »

Spunkster, can I do this vice versa?
User avatar
Spunkster
Site Admin
Posts: 22703
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

It will only work when done as I have posted.
Locked